Recent content by adamnbecky2010
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
So just looked and nobody anywhere near me with nanocom for my rangie fanbloodytastic :mad:
-
A
Is there any one on here that will come and do a diagnostic I'm willing tompay the going rate please
-
A
It was an autel Maxisys that diagnosed my car and the error was anti theft alarm serial link fault error code 94
-
A
Rf receiver is connected and it's the green spot updated version
-
A
Not by the button only by turning the key anticlockwise
-
A
Don't know if this helps but central locking isn't working only drivers door
-
A
No engine doesn't spin as you turn the key it just beeps and says engine immobilised press remote .transfer nuetral gone now as I've put on new battery
-
-
A
Will not start tried sync mate and it flashes 5 times which is a communication fault
-
A
Transfer neutral,widows not set sunroof not set etc key code lockout engine disabled press remote and indicators flashing
-
A
Right then checked both door out stations and they seem fine now on the dashboard says neutral and press remote any ideas ?
-
A
Don't know what diagnostic was used but I've put on the fault I've been told to check the a frame connectors for problems so I've checked them and for the rest of it mozz told wammers mines the same as his engine and year wise on the dash it says engine immobilised press remote I'm sorry if I'm...
-
A
What do you mean Druim ?.
-
A
Yes had it on diagnostics and its a anti theft alarm serial link fault if that helps
-
A
The two white connectors on drivers side a frame it's the larger one of the two and the White plastic connector has numbers when the wires go in and the one has number 16 going into the connector but on the plug you put into it there's no wire it's green with red stripe