Recent content by _Snowy_

Thanks for the replies, Yep tensioner and idler bearings were both gone and replaced for that previous video. Belt is the correct one for td5 with AC and is definitely the right tension. The new one is apparently "OEM" but came in an all makes SNR box. Taiwan so not complete chinesium...

Hello yet again. 99' 110 TD5 with A/C Fitted a new belt, tensioner and idler since they detonated each other during a recent overheating scare. Started up at idle and the tensioner is bouncing about like a mad thing. Poor quality video uploaded at the link below... Will this bed in/settle...

Second for this. Its quite pricey but when I rebuilt mine I replaced the headlining with a LaSalle trim one which had speaker holes moulded into it. Looks really smart and you can actually hear it.

I can take a peek at mine to see if its different in the morning dude. Seem to remember having loads of problems with this after it went the first time, including super glue etc and worked out easier to just replace the whole pull with an OEM one

Hello again, My 99' 110 originally had the three individual 2nd row seats albeit with the high backs. Many moons ago I swapped them out for a 60:40 set as part of my campervan setup. Since then I also had the rear tub/2nd row floor repaired with some lovely thick yrm panels. Due to arrival...

Thanks guys, apologies for my delayed thanks. Been finally getting into a fix over last few days and had the usual mission creep, whole coolant system currently in bits, but in flushing it and having a good look about I've not found any disastrous leaks, so hope it was just the expansion tank...

Afternoon all, Long story short, fan belt shredded itself on the motorway yesterday. The smell of burnt electrics and the battery light is unfortunately not uncommon so I didn't react as quickly as I would have liked in hindsight. Pulled into a services 5-10 mins later and there is coolant...

@Turktowner Ideally I'm looking for a space I can rent to do the work myself! Hopefully something in the works now though!

Not at all mate, my company office is in Botley. Might there be something available?

Sunny Southsea me, but been parked up in Winchester, Four Marks and Arlesford in the last few years. Still on the hunt for a workshop though to let me get my rotten rear crossmember off!

Well I'm about as far east as you can get on Portsea without getting wet so I'm no real Mush!

Hi All, Mods please move this if its not the right place for this. Re activating all my old forum accounts as I'm planning some pretty major work on my wagon! I wondered if anyone here knows of any garages, workshop space or the corner of a barn I can rent within sensible commuting distance of...

Hi Gang, Been lurking here for years, and used to have an account on various Landrover forums back in around 08 when I first met my darling TD5 110, 'Nessie'. Cant find my old accounts so thought I'd start afresh. Since then we've been all over the UK and the Pyrenees together, left the...