Recent content by 90Novice

Hi I have just acquired an ex-mod 90 and am now engaged in the time honoured battle with electrical gremlins, specifically the old "no main beam, high beam only" issue. The electrics are bit different to what I am used to firstly I have to contend with this Also found this connector, not...

Hi I have just about to replace the starter motor on my 1984 90 and want to change the battery cables while I'm at it Can anyone tell me the part number for the correct cable please Many thanks

Cheers So both part numbers refer to the same starter

Hi I am trying to figure which starter motor to get for my 1984 90. It has a 2.5 NA 12J diesel engine Not sure if it's a NAD500210 or an RTC5249, thee may even be the same motor Any advice gratefully received

Hi I have a '84 90 and am having a battle with the windscreen wipers, thus I have changed the wormgear, wheelboxes and spline adapters. So pretty much everything bar the motor My issue is the wipers work fine with the blades off the windscreen but as soon as they are in contact with the screen...

Hi I am having a fight with the wipers on my 1984 90. I have replaced the wormgear, the wheelboxes (both greased as well) and the spindles and everything seems to work OK until I attach the wiper arms and blades and try to actually wipe the windscreen. it looks like the wormgear isn't powerful...

Hi I have a 1984 90 and am looking to replace the rubber seal between the top of the bonnet and the bulkhead drain channel. I can find replacement seals (LR053843) but they all seem to be for models with VIN numbers after DA438754. My VIN is AAxxxxxxx so I am unsure if this part will fit Any...

Another question, I have just had a look and the fuel filter head is only held on with one bolt ( one’s missing) I assume there’s a nut the other side as it’s going straight into the bulkhead. Any ideas on what size bolt it and how to get to the other side to fit it

He did say it took ages to get any fuel to filter and the injection pump uses the lever on the side of the lift pump, many, many pumps

can I just check, do I slacken the injector pipes at the injection pump end or at the head end

Thanks to everyone who responded. I cleaned up all the connections behind the cover at the back of the tub on the drivers and "Hey Presto" we have tail/side lights

Hi My son has just fitted a new fuel filter in our 90 2,5 diesel NA (12J engine) and now it won’t start. He is adamant he followed all the steps in the manual regarding bleeding & priming the fuel pump but the thing will not start any tips on most likely cause and how to get it going

OK, that's my Saturday sorted then! Many thanks to all of you for your help

Yes it looks exactly like this, with regards to which side the link is, sorry but I have no idea

Hi - I have recently acquired a 1984 Land Rover 900 and am having problems fixing an issue with the offside (drivers side) side/tail light. Simply put they don't work. I have changed the lamps and checked replaced the fuse. On inspection of the fuse board I can see a short wire connecting one...