Recent content by 90ben

could be blown seals on your turbo, also make sure you check your intercooler for excessive oil in there and flush it thoroughly with intercooler flushing solvent if you have. as sible88 said the turbos are a S**T to work on.

i cut my old nearside footwell out completely on the 90 and welded a new one in. then just for good measure i welded some nice new plates into a friends chassis so he could get an MOT :) good times

ok so super simple fix. my valve clearances were out by about 1cm each! once sorted it ran like a dream until the battery just died. now i have a new battery its like having a new truck. yayyyyyy!

im in the bedfordshire area so any members nearby please feel free to get in touch as its always nice to meet people that like PROPER cars ha ha

forgot to mention its drinking fuel aswell

My 2.5 N/A 90 is producing heavy black/grey smoke under acceleration. the harder i accelerate the worse it gets. i know these engines are sluggish but mine really is SLOW it will not pull above 45 on flat ground and show it any gradient and it doesnt want to know anything over 20mph! (while...

Hi Guys As the thread title suggests im new to the forum however not all that new to landys. i have just got myself a 90 truck cab with the 2.5 N/A engine and am in need of advice from some of the seasoned pros. i have been working on cars since i was old enough to hold a ratchet and hope i can...