Recent content by 8703dave
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Ud be surprised how much u have to trim off it was a bit scary as I had no info with the arches I just had to offer them up guess then cut away. I did some sweating😰😰. But all I'm all I'm very happy with how they turned out.
-
They are flatdog 50mm arches. And as for the rears I'm hoping to get them finished this morning. Ill stick some pics up once done
-
Finally made the decision to cut out my arches to fit the new tyres and fit my arch extensions. Scary moment the first time u take an angle grinder to the wing!!!
Before
During
And after
-
Lol I hadn't noticed that when I typed it.
-
I'd be interested in the snorkel if u break it.
-
Possible air leak if the stepper turns out to be ok.
-
I'm tempted to take it all off I think and change/ seal all the gasket.
How bad of a job is it to do?
Is there anything troublesome or tricky?
-
Did u manage to get to the bottom of this? Was it the injectors??
-
Hello all I think I have tracked down part of my running fault.
I have found the rear of the inlet manifold on the offside to have an air leak. I have checked / replaced all the vac and breather pipes etc.
I have found that if sprayed with carb cleaner in this back corner the idle lowers and...
-
-
As in title I'm after an oxygen sensor for the offside bank due to no voltage on signal wire. Also after a maf sensor due to some reading being out when tested.
I don't really want to go and buy brand new parts as the are pretty expensive and I'm not 100% the are going to solve my issues.
If...
-
Thanks for the replies I might contact terrafirma for what it's worth, u never know.
Yeah it is a lesson learnt ill cut those cups off and fit the next ones a little looser.
-
No I didn't, I must admit I did thing they were strange and that the bushes were a bit too snug. Ill make sure I do next time as the shocks have only been on about 3 months so its not like they have had a long time of abuse.
-
Here are some pics of the shock it's just tore the stud out of the base of the shock.
The disco is lifted 2" on springs and shocks.
I can accept that he second shock breaking was more than likely completely my fault.
The point about he bushes being to tight might be a fair point I did do them...
-
Hello iv been to a pay and play day today in the disco. Whilst there I herd a knocking so on investigation I found the Nearside rear shock had broken at the bottom where the stud came out of the shocker. I took the shocker off and carried on with just a few minute more driving nothing extreme...