Recent content by 109inches

Yes got the v5

Should have mentioned it’s a discovery.

300tdi chassis with axles, engine, gearbox transfer box. Had super gas shocks all round, exhaust manifold gasket and downpipe. A few bits of welding and the chassis has started to be painted. House move so no time for this project. Looking for £1500 but open to offers.

All sorted now I think Was doing some testing with the in tank pump. Put 12v on the pump from a desperate battery to rule wiring on the Range Rover and no fuel coming out of the outlet. Added some fuel onto the in tank pump side and she fired up immediately. The in tank pump appeared to have...

In tank pump replaced still no good. Clear pipe after fuel filter shows more air than fuel being moved to the injectors. Cycled the ignition 10 times with no improvement. Won’t start not sure where the next place to look will be?

Fuel pump removed today and had nothing pumping. When I finally did get it to pump the pump would die after about a minute of continuous running and would need a 30 seconds rest before it would pull again for a short period.

Hi all Got my first real fault on the Range Rover it’s the M57 3.0 litre bmw engine and as it’s gets to operating temperature it cuts out. It’s done this several times and it’s not at any particular point in the Rev range. Every time before when it’s happened it has just cut out however today...

Hi guys not sure how much interest this will be. Got a pneumatic engineering firm that is going out of business so there are numerous parts for sale. Racking, benches, vices, storage boxes, nylon pipe in various sizes and colours (4mm-16mm) elbows, reducers. Tool chests for sale, pallet...

Yes should have said located in Devon for collection. Smaller items I can post.

Got loads of parts available from a discovery 1. I am keeping the chassis and all running gear but everything related to the body and interior is up for grabs. need it all gone as apparently it’s an eyesore having all these parts around. just make me a fair offer on anything you want and...

The pipe you’re missing goes down to the turbo and controls the vanes on the turbo. There’s another one under the inlet that controls the egr. The turbo is on the left hand side looking from the front of the car and check there isn’t a pipe dangling.

ok so I think I’ve been a bit stupid. If I’ve got my egr deleted and the pipe going to the egr is plugged then it won’t affect anything with what port it’s plugged in to? The egr pressure converter can’t affect the boost pressure converter unless there’s a leak?

Happy new year. No swirl flaps ever fitted. Can’t seem to find a definitive answer on it.

thanks for the help. Another question i have is I decided to double check the vac lines. On the pressure converter under the inlet manifold a previous owner has blanked the egr port. Just wondering which port is for what? One says vacuum and one port says out. Should the egr blank be on the out...

No oil on any of the joints. Engine side of intercooler and radiator covered in oil just wiped it clean to see if it returns. Variable vanes are free I can move the linkage freely. Is there anyway I can prove it’s working when it should do?