Recent content by 101Landy
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
ok new bcu it will be then,
cause thinking of it the indicators worked with the Mod so the wires should be fine and once we have eliminated the BCU if they still dont work we know to look further !
-
Iv read a few articles where its stated that it could be a broken connection somewhere, Im no auto electrification but il have to get a Multi meter and learn, I think if i can follow the wires to and from the BCU and to and from the lights I can eliminate the wiring. Once iv checked that I get a...
-
Hi,
Iv taken out the mod - Yes replaced everything where it should be and all BCU controls working besides the Indicators.
I have had issues in the past with Crossed B, wipers and windows but they did not last for long. Even when the mod was in the indicator light on the dash would flash once...
-
Right ...... :) Got the new fuse box installed and the issue is still there.
I see one of the flasher relays is missing so il go and get one after work, not sure if that will make any difference. The other thing that I have noticed is that the green arrow flashes once then goes off, could...
-
Yup Yup got it, all looks good and try ... no corrosion!
I have already ordered a new fuse box will be here in two days ... then the fun of putting it back together and hoping everything springs back into action (After follow the steps Sieraferry gave me)
For the love of the Land Rover hey...
-
Yes that could turn out to be quite the stuff up ! Am I right in saying I need the complete fuse box as the IDM is not removable?
I have just taken it out and all the wires behind the Fuse box all look in tact, he has cut the wire going into the indicator stalk but stuffed it back into the plug...
-
Ok cool, Il do exactly that ! once I have it fitted il update the thread !
-
One of the wire runs up into the plug behind the indicator stork - FYI
-
Hi,
I currently have no indicators and before I replace the BCU id like your opinion please.
The previous owner has done some dodgy wiring for the indicators (Attached Pic) and after I had the crossed B (Sorted by messing with Internal Fuse Box) the indicators now dont work even with the...
-
Took cluster apart and low and behold, Speaker unplugged and most lights covered with insulation tape! Now I have all lights working :) nice easy fix !
-
Quick update on this, So things defiantly got better after inflating the tires, But seems the SLABS was the issue.
Put in a new second hand SLABS and its now working perfectly, I did have some minor issues with the Self leveling, because I have coil springs installed the new SLABS was looking...
-
There is quite a bad clicking noise coming from my TD5, it gets louder when its hot. I posted a link to a video i took and put on youtube.
The noise is not as bad on top of the motor, I have cleaned the injectors and they then went quite but still left with this..... Any Ideas ?
TD5 engine noise
-
Yes thats for sure, like someone said to me the other day.... you must enjoy it if you have spent that much time on it :)
thnx again!
-
Well now at least you know im slightly crazy and have not lost it all together ! ... funny part is i know what SLABS stands for just assumed Self Leveling was referring to ACE ...
Thanks again for your extreme patience !
-
Fact !" Tomorrow I strip the dash and fix em Lights !
Went and read the codes, forgetting I had the ACE ECU unplugged ... found that the faults have gone to Historical... here are some of the DTCs
4130 - Rear left Height sensor out of range / short or broken wire
4131 - Rear Right Height...