cruise control

thanks for all the help. fitted it today and works fine.
and I didn't cut myself when cutting the hole with a Stanley
just takes a bit of getting used to, feels odd when the engine reeves go up when it comes to a hill. looking forward to being able to move my right foot around on long runs

Is there a definitive list of the parts you need for the CC retrofit?

I've done a search and there's a lot of CC threads but I couldn't find a final list of the needed parts.

I've got a 03 TD4.

hiya buddy

here is the thread u need

hope it helps u

dont know if the admin wish to put it as a sticky to help people in the future

gary

http://www.landyzone.co.uk/lz/f9/td4-fitting-cruise-control-186205.html

just an update I picked up a black master switch from land rover today (£51.96) as I have a facelift Freelander. the one I got off eBay was grey.

as you can see the black one has an image of a clock and the grey a motorway image.
here are the part numbers

it plugs into the blue plug.

also the plug you are looking for under the drivers seat is this

photo take looking towards the rear.
all done not much to see but. for what its worth

Thanks again for all the help here.