passenger door lock, latch and handles replacement

Hi everyone, the insides of my passenger door on my 90 need replacing and im struggling to find the parts. I need practically everything. New lock, latch, link rods interior and exterior handles the button to lock the door from the inside. Door card and the screws to screw it on (sigh) The clips that hold the glass.... and so on.

I need to rebuild the doors internal mechanical mechanism.

I would really appreciate your help and advice in sourcing these parts I have looked myself and yes some parts are easily accessible however im struggling to find the link rods and the little clips that connects the rods to the latch.

Does anyone have any diagrams of the parts and can anyone point me in the right direction for sourcing them.

The condition of my passenger door is beginning stress me out a little because I can only just lock it from the inside but its no real use because the glass will fall really easily and I can only open it from the outside and lock it from the inside.

This will certainly fail an mot.

I hope someone reads this who can help and has time to help. I'll owe you big time and in whatever way I will return the favour.

Cheers

Lewis.

My only advise would be to try the breakers yard
and take your camera, that way you will remember which way everything goes

If you go to this link

https://onedrive.live.com/redir?resid=3211C689758CE7E0!21882&authkey=!AIvfcRQCZn-mwSw&ithint=folder%2cpdf

it should take you to my onedrive, on there open the body and chassis PDF and its on page 63. There is also one for the trim which should have the door card part numbers.

Then go to somewhere like lrdirect.com where they let you search by part number.

My 90 passed its MOT without a working lock on the drivers door, though it did lock from the inside.

Any good?