Defender got shot

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Landy DL

New Member
Posts
72
Location
Co Donegal Ireland
when i bought my defender i noticed a small hole in the passenger side floor matt i could see outside through it so i opened the bonnet and had a closer look and i seen a much bigger hole where the previous owner must have been doing some shooting inside the defender ha ha , anyway i stripped her and fixed it during the week heres some pics

SDC13733.jpg



from inside
SDC13735.jpg


outside
SDC13734.jpg

SDC13737.jpg


shot brake pipe bracket off too
SDC13736.jpg


cut out and cleaned for welding
SDC13738.jpg

SDC13741.jpg

SDC13739.jpg

SDC13740.jpg


welded
SDC13743.jpg

SDC13746.jpg

SDC13747.jpg


painted it and then wax oyled it

SDC13752.jpg
 
Last edited:
Brilliant job :) Looks like some nice welding there, and I like the fact that you've ground it down so that it's flat. No one would even know it'd been repaired.

-Pos
 
Is it easy enough to remove the wing skin, I have only ever had the entire wings off.

I take it you need to take the inner wing off first to get access to the fixings?
 
Is it easy enough to remove the wing skin, I have only ever had the entire wings off.

I take it you need to take the inner wing off first to get access to the fixings?

it wasn't as bad as it looks you just need to remove the washer bottle and the air intake for the heater you can then access most of the bolts oh and you need the plastic arch off too , small hands are a great help at this job :D, when i looked at the job first i thought there was nothing to taking out the big splash guard just a few bolts and off it comes didn't think i'd have the wing off and the shock out but i am very happy with the way it turned out

@ pos yea its much nicer job with the weld grinded flat , i could't get it all grinded flat on inside but its painted now and you wouldn't even know
 
Back
Top