TD6 breather

Sold my Classic LSE and bought an L322 last week. It's a 2002 and has full LRSH except for the last service which was done by the cowboy I bought the car from.

Today I went into my LR dealership and bought some filters and gave it a proper service. When speaking to the spares man he said I should change the breather under the engine cover so I came away with one. When I removed the cover I couldn't see where the breather was, so if anyone could point me in the right direction it would be appreciated.

See attachments for the breather pictures, the blue cylinder fits inside the black casing

Finally the vehicle was supposedly serviced just before I bought it, look at the state of the air filter

take the covers off so you can see the injector wiring, the breather is on the top towards the rear. you have to unplug the injector wiring and undo its little retaining screws that hold the loom down, its an easy little job really. crack on.

arron beast unleashed said:

take the covers off so you can see the injector wiring, the breather is on the top towards the rear. you have to unplug the injector wiring and undo its little retaining screws that hold the loom down, its an easy little job really. crack on.

Click to expand...

Thanks I'll have a look today

Located and changed, thanks for your assistance.