Latest activity

Welcome to Landyzone. Post some pics when you get time.

Don't think the MAF will put the engine light on. You need a code reader which will read a TD5 as they are not OBD2 compatible.

Throttle pedal will put the engine light on if faulty I do believe.

ive ordered a new MAF sensor, will at least eliminate that if its not sorted. Thanks for the feedback .

Mine was a pain to start when the starter motor was effecting the cps signal that's for sure.

I thought that, but it has no problem starting after it cuts out. With CPS it has difficulty starting i believe.

CPS, maybe?

Should do. What make/spec parts are you fitting?

Well ill be down there this weekend so i will be sure to report back exactly what else is in the way if anything

It requires some work(which old Landy doesn't) Seller's description: This is Chassis no 1 of the UK home market vehicles, and was on the stand when the 2A Forward Control was launched at Earls Court in 1962. Still has its Land Rover Number...

Sold.

Update - thanks all, put everything back to basics and tuned it by ear with a gunson for RPM. Plugs seem nice a brown so will check back after a longer run

Bit of a c***up. I haven't finished rebuilding the lower dash so have been driving around with lots of wires hanging loose, which was a daft thing to do. On the last drive, I got a load of smoke in the cab. I stopped and sorted it out temporarily...

How many amps required to actuate one of the relays? If it isn't a lot just use a buck convertor to step your 12v up to 24v for testing. They are usually <£3 ea.

That joy awaits me. Still, cost of new hitch on a grenadier? £1,400. Depreciation while waiting on the parts to fit a hitch? £1,400.

An interesting combination! A Land Ripsy? Does it have the flexitor suspension or leafs?

:banana::banana::banana::banana::banana::banana::banana:

Except he won't. Why? Because he'll back out of it. Like everything else he says he'll do... I'm still waiting for the headline "Trump takes one right between the eyes."

Hang on... What? How do I code it to the car? Not something I knew needed doing. I've got GapIID so I should be able to do it but hadn't heard of that, do you have any instructions mate? I would be VERY keen to avoid replacing it again as it...

Quite rare now I would imagine.

Ta mate, well I got some of that!! The £200 solution would be cheap, ugly and involve a lot of faffing around , the "next up" solution would cost at least €585. Compared to the €60 I have just lashed out on tools and capacitors, to be delivered...

Only works until the big parcels reveal small items! I did tell her that I can use the parts I don't need when I'm finally done. Which actually is the plan, so if someone needs a RRC steering column, let me know!

Funnily W's Pluriel 04 MY runs on it and it says so int handbook. It hain't missed a beat on it.

Where is BAB? Do you have a decent Michelin Atlas? We use it to plan routes and swear by them. A 5 is ridiculously lenient, my Disco 2 diesel is a 5!! Yep, it is all mad! But do it quick before they abandon all stickers over here!!

You do sometimes question one's sanity when you buy another one though. Last time i checked i'd broken the £5000 spend barrier post purchase on the 101. And it's still up! Next job is brake servo. My sphincter can't take the stress of having to...

Ah yes. My Citroen ZX. Took all Saturday to remove the dashboard. EVENTUALLY! Haynes manual said to remove dash, SOD THAT thought i so commenced removing bits because i wasn't going to remove the whole dash. Until i did! Then discovered the new...

Also, As is probably known, I have a wide range of Freelander 1 spares and accessories. If you are coming and wish to purchase parts then please let me know oif there are specifics that you require and these can then be removed, tested etc. Thanks

I'll have second refusal on it. But I'll want change -----

I have yet to look at the new battery charger I bought , it may even do 24v come to think of it! I have only used it once, a coupla years ago!

The planning continues: The day will be 10am until 7pm obviously going on longer for anyone who wishes to camp overnight. Arrival anytime from 10am at the Farm. Precise location will be sent to those that PM me. There will be PScan...