Latest activity

Any photos? If damaged they can be hard to remove.

Had half an hour to spend and tried to remove the whole broken half shaft from the axle, and it seems stuck when it is almost all out. Is there any trick to remove it or just brute force?

Sorry but i am still finding my way: this diff i took photo of is a extra diff i have that i plan to install, because I do not want to use the welded One...

Ah! Yes. I understand. Do you have a photo of the original diff? The one fitted to the back?

Let.me explain the whole story: the guy that sold me included this diff in the deal, because he was planning to remove the welded diff. I plan to Change to this "regular" diff because I wont BE doing any hardcore OffRoad, so i do not feel the...

Cheers @doriz. I don't seem to have any push button on the dash. Looks like I'll have to do some sort of after market mod. Can't be arsed to take the dash out to get wires thro the bulkhead tho. I envy S2 owners who don't have that hassle!

Freelander 1 td4 70k Having issues on hot start Surging under acceleration Limp mode kicking in So been on two scanners came up fuel pressure sensor and found out high pressure pump wasnt hitting 60kpa at 3k. So bits ive replaced High...

The windscreen wiper on/off knob/button pushed in is the screen washer iirc. My bottle has a motor, I suspect the 2nd motor is a PO modification.

Either of those sounds more likely. As both the set in the car, and these go through the resistance range smoothly, will try the replacement HEVAC first. If required, I have 5 spare pots ready. Did one in the other car a while back, but had...

If that diff is welded you will need a new one or at least a set of the bevel gears.

Took the right blend apart to check. Def says 10K on the pot & measures 12.3k on terminals !! Bit more than 5%, but hey ho, if the HEVAC uses it as a voltage divider then should be ok. Will see what happens with the "new" HEVAC.

This is a reasonable thing to do, keep it road safe and pass MOT, do the the necessary work as it comes up. Might end up with a bunch of stuff to be done at once so. But yeah, those nut and bolt restorations trnd to never be finished, cost a lot...

@meego that’s an old style landrover relay with trailer light set up. I found when these go some relays don’t work in there place(especially if you have glass fuses & LEDs)) Either put resistors on the indicators or go to bolt on bits & gets the...

Have you a photo of what you have? Surrounds may be cross fitted to rovers etc or older cars.

Can't remember if he has petrol or diesel but the oil burner only has a rear one.

After eventually fitting the downpipe I can report back that it's a poor fit. The downpipe is the one with the dummy cat on it and it is literally 2mm away from the chassis and that 2mm took some work. I have a feeling it won't be long that it's...

Just googled Texecom Premier Elite 24 and I see its a basic panel, I haven't looked at the engineers install manual or the user manual but somewhere the should be the information u require or not. If not then there’s standalone devices around...

Also did some tests on my spare heater box & motors today. Tested each motor with 9V battery & multimeter on the pots. They do seem to vary a bit, but we have to assume the HEVAC simply tests the voltage across the pot across the range when...

I not familiar with the Texecom product, but does it feature a wifi or ethernet link to you broadband router, if so and you have the compatible app on your device and connected to the internet you will be able receive an an indication of an alarm...

Funny you say that I have lost muscle mass since taking statins so stopped them about a month ago also eating more now

.... AGAIN! Just washed my car and the NDN starts up a saw in the back garden trimming blonde-ones off bits of wood for "perfect-fit" and the cars I just washed and the wife's that I just paid to have washed are speckled with wind-blown sawdust...

Tremendous thunderstorms today and forecast for tomorrow had about 60mm so far so tank is filling up very loud thunder over head cat don't like it nor does the W got her head stuck in pillows, 🙉🙉

I do have my own diagnostic tool and also access to a decent autel diagnostic scanner too

Already sent Les an email today, hoping to hear back from him and get this fixed.

Any one know a landy place in Sheffield

Avoid trying to order from an LR Dealer. Somebody posted a while back that UK dealers will take your money, and then inform the keys are on back order. Instead ask the dealer for the "Lockset Bar Code" based on your documents & VIN. It's a...

yes she said she couldn't find the vain which surprised me as I have them sticking out everywhere

The problem can also be caused when they simply cannot find a vein. W has this problem and they can only take blood or inject her in the right arm as she had to have a lymph gland removed from under her left when she had breast cancer. The least...

LR dealers in the states won't touch anything older than 2011 at this time. So they sent me to the aftermarket shops, without a transponder to essentially copy they have no way of making a new fob....so I'm being told.

Reminds me of when I had a cat scan thay had to inject some tracer fluid in my arm poor nurse bent three needles she was so apologetic she said I better get a doctor, she got it on the 4th attempt 📌📍📌