Latest activity

Ive had a quick look for them aint got much time atm & im off out in the Waverley tonight. :cool:

I will have to replace the studs on the downpipe top fixings yet. When I do that I shall have a but more off a faff around lining it all up. It has a dummy cat on it, if that was a slightly different shape then it would be a nice fit.

Anyone know what the tiles are in the pic, they are in a 1934 boat thats getting scrapped seams a shame to bin them I was going to try n save them along with some other stuff. Its mostly teak with the owners add on poor carpentry.. One for...

Thanks, worth a try for £5. Cheers

The Fuel Rail Sensor on a petrol Freelanders 2 (3.2 I6), part number LR015294 or LR005493, is located in an easily accessible location, but the single torx bolt is almost impossible to access without unbolting and partially lifting the fuel rail...

Yes it is a worry in a wooded area and its terrible seeing what happens when there is a fire. My favourite part of France is Landes department and it has a huge amount of pine forest, I worry about what would happen if there was a fire there...

Of course it's the French ! Interesting! I'll check that, thank you

Only for home use. Its very difficult growing much here really and the irrigation makes constant watering easier or helps make sure everything isn't dead when we come back from having been away.

Today I removed/replaced fuel rail sensor and got a new error code P0183-00. Fuel temperature sensor A circuit input high. Once it generated a check engine light, but not each time. The fault code comes almost immediately on driving. Odds are...

Nah, that's the FRENCH! We invented the two finger salute JUST for them!

Jelly Babies and you may have had me...

👍🙏

Im after a series 1 or 2 front panel with lights and grill to make a wall light for my mate who used to be into Landys but is now too ill to drive. Condition doesnt matter as a bit of "patina" will be fine and Im going to adapt the headlights so...

New here! I've got an L405 and the auto upper tailgate is not clicking shut. It closes ok but wont click shut hence I can't lock the car. Replaced both batteries in car and had them programmed to car. Issue was there before batteries were...

Hello! PO disconnected the screenwash bottle and I'm trying to refit it. But it seems like there are 2 motors. One on the bottle and one that connects the washer pipes to the screen. I've no idea if this is right, plus there doesn't seem to be...

The top 8 upper bolts are captive and 10mm so a good six sided socket is the best tool for the job, no WD-40 should be needed, they screw into a brass collet which in turn is pressed into the plastic cam cover. Crack open the 8 bolt/screws, then...

Possible not charging from alternator.

Given that the car is parked for static leak tracing, just unplug the relay. Then once that's done put the relay back, and do live leak tracing with engine running. In the latter case you're looking for leaks during normal operation. Better...

I've found with the exhaust pipes there can be a bit of fettling needed to get them to fit, and not foul the chassis. to stop my downpipe rubbing on the chassis I've spaced the relevant bracket away from the chassis with a few washers. Also, I...

Unfortunately I can’t make the meet on Sunday but I’ll look at others in the future. They’re well attended. 👍

Exactly that Datatek 👍

Definitely an argument, but these are pretty chunky nuts. What would think could happen at the worst?

I know you can get different grades of stainless but I am always dubious using stainless for structural applications. It has different properties to high tensile mild steel. none structural I have replaced nearly everything with stainless, but...

Cotswolds and Worcester have a joint meet near Chipping Norton on Sunday as well, and I believe there’s one at Coco’s Wild Camp in September.

Hi All, I’m after a lower or bottom dashboard without a speaker if possible, for a 1998 Sreg defender 300tdi. Unfortunately the last owners cut away the dashboard to fit a metal box to fit a radio and switches and never finished it, so I want to...

I know @landowner said ANYTHING will do, but I don't think he meant Freelanders were included. 😁

Another meet local to me tomorrow… https://www.teaonthetailgate.co.uk/cotswolds

Just back from the local garage at Erezee, a vey helpful chap there, speaks English as well which is a rarity in Wallonie. He's arranged a recovery truck to get the car from the dealer, who say they've got no idea when they can even look at the...

It seems I bought one on eBay. Had sent an offer earlier in the week, and it got auto-accepted last night !! But if that doesn't work . . . . . .

Ill add a cherry on top lol. Just go through google images. https://www.wrington.co.uk/product/machined-finish-stainless-open-ended-nuts-to-fit-defender-series-3-discovery-1-late-series-2a-and-classic-mk1-range-rover-for-steel-wheels-only/