Latest activity

It is a case of attacking the chassis and other steel components with a wire brush etc and then as you say treating the rust. Once that is dry (next day if you can wait) then Dinitrol is good as are many of the other branded sealers. I like the...

I just thought of it @ar1g3, are both the harmonic weights for your diffs still there and their bolts tight/rubber bushes still intact?

Absolutely! Fuel uptake rook 2× M4x16s and around the sender required 6x SAE 6-40s. Hopefully that helps someone in the future.

Also found a garage that punch my VIN for what I think is a fair price

I found a set of French headlight !!

What should we pay attention to when removing the MAP sensor? Do we need to pull the wire shown in the picture upward? Most importantly, what should we use to clean it, and should we squeeze it into the hole?

I found a set of headlights for a resonable price picking them up tomorrow!!!

I believe he did like to lick them, yes.

Haven't got my V5 at hand, so from memory; My 2012 factory station wagon has body type Dual Purpose Vehicle. (The only difference I can see that this makes, is it is not restricted to the same speed limits as commercial vehicles). The important...

So he was a stamp collector :p

@Hippoo has his own group- Freelanders Are Great Society. He wants everyone to become F.A.G.S. like he is.

Don't waste your time with WD40. I've been using an aerosol of gun oil for years. It's a great corrosion inhibitor.

...that my son called me from Cologne to ask for a favour regarding chaperoning a surveyor at his house while he is away at Gamescom. As we were talking he suddenly lost his ability to speak and then said "What the ****! There's a completely...

To clarify at the start I am not interested in changing the body type so it is ULEZ or similar exempt. This is purely so things are correct on record with the DVLA. All the vehicles will be historic class in the next couple of years, and only the...

The link rod on our freelander 2 failed while we were on holiday. I think that the rubber part that sits behind the ball and socket mechanism failed, causing the arm to fall out. I did a quick repair in a Croatian car park with a piece of...

My suggestion may not fall into the cheap category either as Owatrol is fairly expensive but cheaper than stainless parts! Its also one of those things that once you have a can of it you find all sorts of other things to paint with it. My old...

I appreciate you pointing out what I was wondering about. I think the leak is only coming from the Y-joint. When I checked it by hand, there didn't seem to be any problems with the hoses for now.

Afternoon all, not so warm today the sun is having a lay in after all its hard work in recent weeks. The silly dog managed to get hold of a toad last night :oops: bloody foaming at the mouth & she was sick during the night all I washed her mouth...

So how would he, or you, turn the watter off if you needed to, frinstance, change your stop cock? Barmy!

Off out soon to pick up the apple juice we forgot to get yessdi. Very misty and a bit cooler today, we are I think in the cloud base.:):):)

Is you on a shared water main then? :eek:

According to the Frog fire brigade at least 80 % more like 90% have a human cause either deliberate, or accidental like chucking a lighted cigarette out of a car window. They are trying to say that things like lightning strikes do not commonly...

Oh dear, and I thought they were Frau and Fraulien. Today I have the sisters Knee-ertz as well as their mother Frau Thumertz. Still we keep battling on, don't we?!:)

Love it! I had quite a few with musical themes. One they particularly like showed a pair of slightly blurred hands playing a keyboard. After I had been disciplined for something I didn't do, I got rather angry and my wife bought me one of those...

On shelves next to the kipper-like ties!

The oily mess all over the box may well have blown back from the engine bay. You need to do a good clean up/pressure wash. Can see an oil dribble from the selector area. there are seals on those shafts that can be replaced, just a few bolts to...

Steady on, my Dad was a philanderer. ;)

I'm currently redoing floor + boxed sills on my discovery 200 TDI. Aside from a small well on left B pillar, the sills are not yet welded. The body is only helded by the 2 front mounts and 2 back mounts. But it is leaning to the right. Is this a...

We can all do our bit to rid ourselves of them. I’ve started a protest group ‘People against the Freelanderer’

I use Mannol engine oils in both my P38 and MX5