Latest activity

it was an x3 box, you would have to change both diffs as the transferbox is not a true diff

This ^^ In a 90 you can carry people, things,, the dog. But only one of them at a time. If you need to carry more than one thing at a time you need a 110.

How many can weld to the BS5135 spec? ;) Great info though

I grasp that fact but I have said maybe 20 times that I do not care about acceleration because that will be only before entering the highway or exiting the highway hours later. So once again my idea won't work because of something that I am not...

Hi mate I'd just like to thank you, I've rebuilt the valve block and after some fiddling around with a split compressor pipe it air up extremely quick . Cheers 👍👍

You are talking about a situation where a car is accelerating in a higher gear than the optimal gear, requiring more torque. When driving at a constant speed on the highway for several hours this will not be the situation I will be facing (as I...

Changing the bulbs on the instrument cluster is dead easy, just remove the module and you can get at them all from the back. +1 for Les on the key front. I got a spare made a couple of years back. JLR gave me the lock barrel code and all I had...

Coz I'm a big kid at heart. A common affliction with owners of older Land Rovers.... Just call me Carlos. You're old enough to remember that Ad....

This is what I was working from With all credit to the originator who is not me.. Hope it works........

In pieces yeah mate

I read threads a few months ago about people changing the L322 to a manual gearbox. I stumbled upon them when I first had my idea and was doing some research online. I might have seen your thread, did you use an X5 gearbox? I watched a number...

You want to take a whole engine?

yea sounds like it’s moving fluid to transfer, do as above from findo, not hard to do but it’s heavy ish.

Have acquired a specialist puller which might do the job 🤞🏻

I've got the yellow polys on my anti roll bar but did fit oem spec bushes into the hockey sticks. 👍

It’s one of Les’ options one the order page.

nope all oem :)

That's one good reason why this forum is greeeeeat🤩

A quick youtube search brought me here. You can see the seal when he removes the transfer case. Also its american spec so will be auto gearbox.I presume

Is that the Counts?

By way of a quick update, decided to tweek the newly refurbished steering box. Put approx half a turn into it and hey presto, the steering is now sooo much better!! Conscious that you can shorten the life of the box by tightening it, but I will...

Yesterday i took my 1999 P38 for MOT at 2.45 pm and by 3.30 i drove it out with a pass. Not bad seeing it hasnt been on the road for 5 years but before it went in i had to replace 5 bulbs but that was all today i taxed it.

I was reading up and it says between the pre face lift and face lift theres like 700 changes. I also thought the facelift had a 16 or 20 p engine I looking to take major parts like Engine and hoses Engine control unit and body fuse box Fuel...

Or the stub axle is worn where the seal runs.

Ok, in general for 1 or 2 persons at the most, family has to be a 110.

85-95% of 10p or 15p (facelift) work together! Bits that don't! Exterior: rear light cluster, headlights, bumper!! Engine: complete change! Look for both! If cheap enough ??🤔