Latest activity

I use Dunlops on my L322 and haven't had any issues but that said, I didn't have any issues with the old ones... Until I did. Have you looked at Maltings? They have them on their site here...

That's the guy!

Let me get the bag and see what's in it!

Some more recent crossmembers have the tab fitted the defender way, avoiding the need for a spacer.

Value is in RAVE. I thought it was 12 thou of an inch but I might be mixing it up with something else.

All a learning experience. Honing tools on eBay.

Morning All. :D Funeral was fine, very well done to all. :) Awful day & night, as I appear to have gout in the big toe on the right foot. :( May try to get to the Drs. for some meds. :) Have a good day. :D

hello everyone . 3 half years ago I rebuilt my 12j engine . This was a full nut bolt gasket everything done job . Crank polished Block skimmed & honed “020” Head skimmed& valves polished Injector pump rebuilt Cam & followers had minimal...

That is a severe leak isn't it? TO have the water splashing on the door panel like that it may as well have the window open! I think you need to give it a bit of a hosing with a friend sitting in it. Have you cleared the drains out? I've...

Yeah it works now

Arrive tomorrow. Fit at weekend. Yours needed to be done last month 🫣

Hi Guys! A friend of mine has a Land Rover Specialist Workshop in southern spain and is looking for talented Land Rover Mechanics, anyone interested please get in touch :)

+1^

@dubloman 👍

Setting back the distributor after engine rebuilt : TCD ok, the oil pump notch is pointing 10 to 4 to match with the distributor, the rotor is pointing at about 5 o clock but the cap shows the number 8 (near the clip) and not number one ...

ring gaps equally split...? What do you mean exactly with that? That their openings are staggered and not in line with each other on the piston? Black marks no not really, scoring stripes yes. marks no. No i have not honed the bores, i havent...

Like most specialists and dealers

A girl in overalls... And a nice young lady in dungarees.

I think you're right, so long as the spindle is pushing the wheel round, like on your car. Whereas, on the alternator the pulley is pushing the spindle. Pushbike pedals are another thing.. 🤪

There is a YouTube channel called Matt's Off Road Recovery where they build off road recovery vehicles from other cars / SUVs. There is a recent episode called, "You Were Right… Everything Wrong With My Fleet!" In the episode he talks about all...

Bored but you are still coming back here and commenting here? How dumb is that, or are you lying? Given that I am not posting new comments here but only responding to insults, there are about 20 pages of people who cannot leave, who keep...

Watching this thread. Err unwatched

Me too.

Traction fault might need investigating rather than just clearing. Far too far from me for my nano

It will run on just 3 cylinders but no4 is the main one it needs