Latest activity

It's simply not gramatically correct, so the sentence does not mean anything. The intent might be correct, so write it properly, or do what other non natives do and appologise for their English upfront.

Took the P38 out for a camp before a cycling event around Exmoor at the weekend. Some very steep hills in very hot weather and it was absolutely spot on. Currently hovering over the buy button for new front and rear airbags for the P38...

Oh no, when I went to do the rear differential I would notice that the bolts were wrong and then I would get new bolts! So I would not be on the side of the road so this comment is ridiculous. Also you are assuming that I would do the front...

I don't see the page number 21, on mine it still says 20 of 20, so one more failed gotcha comment from you!

And when thay do it's like pot holes always a bodg lots of the main supply pipelines are constructed from asbestos (post war ) when disturbed thay leak every where these are the reasons for not fixing leaks as the jobs just snowball

This is what I mean by insults made to me after I gave valid logical answers. Here we are on page 20 and it's like I'm back on page one. It might sound like gibberish to you but it is not and that is the point.

and btw, we are now on P21 & counting :handbag:

Once again, I do not care about technical information, because I have already answered my technical questions and now I am just laughing at gotcha questions from idiots.

Did you know? (and not a lot of people know this) that Stirling Moss's dad wouldn't let him drive a car around the estate until he could do it in reverse. Fun factoid, I am full of it them tonight!!🤣🤣🤣

er no it's not a technical response, it is gibbersh English. Sounds like it came from a Chinese translation.

Oh no, I would know that when I was changing the first bolt on the first differential, and I would buy some new bolts and when those bolts arrive I would do the change. This is what I mean by ridiculous comments. Please just give it up.

Yes if you want to research it you can. I am not having any more technical discussions here, I am just laughing at idiots. I am not investing any time in answering questions that involve me doing any work, I am just posting insults in response...

Fink I'd better get changed and go "doon the toon" to buy some "Caillés". Producers' market on tonight but I don't fancy it on my own, although I may change my mind and stay depending on who I see there. Anyway we/I have large amounts of...

Oh I know the answer to this question, I am asking the other person to look it up because they don't know the answer and that shows their lack of understanding, not mine. The point is that it doesn't matter if the example is a 2 wheel drive car...

So with exhaust leaking while pump is running the diaphragm almost certainly needs doing. It was probably that failing that killed the old pump. Valve block has to come out to do it as the valve sits between the blocks highlighted below. The...

Oh no, the bolts that can handle the maximum output of my engine while towing more than the entire weight of my engine will not be able to handle driving at a low RPM with a car that is not towing anything. That is actually a technical response...

no white powder thankfully.

very good for the environment no life with out water sit and observe, wild life increases 10 fold ,most planning laws now are very limited, you can extend your home without planning consent! !

Roll on P21 . . . . :handbag:

Best comment ever! You said "Clearly you are rather over sensitive to anything contrary to what you think you know." Actually that is the perfect description of everyone here, when I responded to their technical comments with facts as to why...

I've chickened out. I need to pick the missis up in a couple of hours from work, don't need any disasters! 110 is off the road waiting on bits. I'll wedge the box lever to 'cold' and roughly fit the clocks back so I can still use it. Do you know...

+1 on check for white powder - if there is the dryer is breaking down & either needs replacing, or new dessicant. Diaphragm leaking could be either dryer powder preventing it from closing, or a split in the diaphragm. Full valve block rebuild...

I'm sure it will boil for a while yet !!

That would work!!! Italian Tank and all that!!!

Oh no, he said cars and he should have said SUV for one of them, I got him!!! Haaaaaaaaaaaaaaaa. No, when I am responding to an insult that is full of lies that avoids the facts I don't need to spend hours being precise as if I was writing a...

I can feel air out of that also , put my finger on it and you can hear the air noise change. Thanks mate god send 👍 What's the best step from here ? Is it a rebuild of the valve block?

All good and MOTed the tester said its a pleasure to work on such a well built car , he commented that he failed 2 FLs last week due to rust and bits falling of I nearly choked for laughter 😁😁😁😁😁😁😁😁 Solved the problem, drive in reverse all the...

Although this is fun I am seriously considering switching off notification to this thread as I seriously have better things to do than cross swords, or handbags, with this guy with a massive ego problem. Keep on trucking with it peeps as I will...

I stopped having technical discussions about this question a long time ago. How many times do you need me to say that to you before you get it? Something as simple as getting different bolts is not a big issue, so it is irrelevant to whether...

No that's the compressor inlet filter. The exhaust silencer (not filter - my bad) is at the back of the block. It just unscrews by hand.