Latest activity

not a fan of that size of jubilee clamp prefer the two wire type the jubilee clamps tend to distort the rubber hoses you can get smaller thinner jubilees that would fit better or the correct sized modern spring tensioned clamps ,be careful when...

So the whole drive train as noted in first post is not all Disco. Recon you just need the repair kit for axle of your year and fit new Railko bush and seal. You also need to set the swivel pre load for it to work right. How to info on the Youtube.

Actually I'm laughing at all of you guys every day given how wound up you all are about somebody asking a simple question. Just think about this, if no one commented to me with their gotcha questions I would've stopped posting here a long time...

Not retired, work for myself. I am from an age when swapping parts on a car was easy without computers. But I keep up with the times which is why I have an OBD reader and why I came here to ask questions about my planned change.

Test it, but indeed sound like you need to treat it to a shiny new battery

Sorry I replied to myself. The part cost 50 pounds and was not a land rover part. Is the master cylinder hard to fit if I get the original part.

I think it was a non land rover part. It cost around 50 pounds. Is it hard to change.

2011 Range Rover L322 blend door actuator not working properly. No cold air coming through on passenger side right side. Does anyone know the part number and where to get one other than a main dealer

I haven't checked them no, but they've been replaced with stainless steel ones from pioneer so I should imagine they are fine. The hand brake had been a little weird, it seems very... tight, when I drive with it off sometimes going over bumps...

Flexi will work for a while, mild steel flex short life span, stainless steel longer life span, but even they stiffen up and then split after time.

Hi everyone, I just joined the group and I need help with a problem. I bought a 2007 freelander2 2.2 with a broken timing chain which I replace the chain and the belt. The vehicle is turning but not starting and these permanent codes came up on...

E's got your teef.

You are right it was the seventh word, it was the first sentence that ended with it. That fundamentally changes everything, oh wait it doesn't, it makes no difference, and here we have another gotcha comment. I don't know if you are mentally...

Just a thought, how old are the glow plugs and will it start with easy start or a small sqirt of brake cleaner. If you have one failed flow plug, the engine is a damn pig to get going had you checked the modulation when it was running and at...

Done the front propshaft UJs and refitted it then sealed a leak (hopefully) on the transfer box. Discovered that my rear prop now needs the UJs doing but that's a tomorrow job and with that off it'll let me sort out that diff flange leak as well.

Nice colour. I was considering painting mine green and you might have swayed me. What paint are you using?

Have you checked the flexible hoses? They can bulge causing spongy brakes. You would know if the rears were wrong by the hand brake.

Don't be surprised if you have more than one issue. Maybe a bad connection AND a duff battery.

They were talking about it here, I think its to rain tomorrow.

Depends on if they chucked wood if they were a wood chucker, if they didnt chuck wood then they wood not be a chucker. Wood they...

Wound tighter than a violin E-string this bloke is

Did you manage to find somewhere that you were happy with?

It's a bit of an odd one as two or three weeks ago in the first instance the car had been fine then on a random occurance it did not turn over. No click or anything. Just dead. I looked at starter connections, including the signal connection...

Following up with this again. I bled the master again, which admittingly made it a little better, but still when the engine is off (Brake booster now works) the pedals goes hard but is incredibly spongy! I cannot work it out!!! I have replaced...

Being a student has quite a significant effect on the viability of buying and running a Landy. Firstly, affordability. Insurance and reliability as mentioned, and fuel and general running costs. Also, consider the theft risk. They do get stolen...

Mine had an intermittent starting problem a few months ago. Turned the key and nothing, no solenoid nothing. Tried jump starting; still nothing. Replaced the starter motor then it was fine for about a week then the same thing happened. I put the...

Thanks mate. Sounds like I fell into a nice group.