Latest activity

GEMS has an additional cover plate, but I think the 1999 onwards it's part of the sump on Thor engine ? Not sure about diseasel though. The bell housing inspection plate should be enough to see the flex plate on all types ?

A roller gets the right texture every time. Sheep wool roller for smooth finish

Yes you can just fit one scrader valve in place of the compressor, but you will also need to activate the diaphragm valve to fill the tank. This also assumes there are no other leaks. The problem with this approach is the tank will get...

No probs, it's always good to have others on here! 😁 Kev

Thanks @sierrafery Will sort it when I use the Garage access. Kev

My local MOT guy will do a dummy MOT test for the standard fee. That way I can fix it before the real test & avoid fails or advisories.

You were the one saying to were offended !! Most of us just want you to go ahead and do it & report the outcome after the trip.

Instead of wasting money on a vanity project like HS2 they should have created a national water grid to even out the imbalances across the country and created more reservoirs and storage facilities.

It looks nice in the picture. However, look beyond the paintwork, alloys and steps. Make sure it’s not just tarted up. The engine is not original. It’s most likely from a disco 1. What does the seller consider a nasty repair? If the chassis and...

Just so you know, if you didn't already, they never made a 1989 300tdi. Post the advert and check it has a vin number relevant to the vehicle. It is highly likely it will have rust, you just have to find it.

At that age mileage is not relevant and you need to buy on conditions. Firstly of chassis and bulkhead, secondly on mechanicals. I have over 400k on my ‘89 110. But only a few body panels have actually done all of that mileage There is no...

Not here yet. Useless water companies, can't plan ahead or fix leaks, won't spend on new infrastructure. Instead they plan to charge us more when there's a shortage.

Not yet.

Come on you two, sort this argument out! 😝

I had three jobs planned for today. Cut grass at the front, pull a few weeds out, chop up two pallets. Grass cut. Neeb took both pallets for his log burner so didn't need to get me chopper out (:eek:). Weeds can wait, it's too hot now.

Proper bit of kit that 🤟

I must add, that when it dropped out it was sucking dust and debris through the open hole and the K&N filter is really really dirty on that particular side. Since the filter had only been fitted six months ago its obvious there is a obvious quirk...

But you've got it sorted. Just dont do it again 🫵😝

Anyone on a hose pipe ban.

Id have pulled out my pressure washer to wash my motor then soaked his tools, accidently on purpose mind. ;)

Looks like another scorcher, need to go n clean the bbq we sat out last night....few beers & peanut butter whiskey. No plans for today. :)

Hello Chalky, reg is nou 944y.

It's people who are in their own little bubble and only think of themselves, their immediate needs and no-one/no-thing else. My NDNEEBS spring to mind. Out in the front garden chop-sawing wood for a new floor, plumes of sawdust up in the air...

Arrr, I understand and we wouldn't be bored. You know we all like pictures🤗

Wire brushed and checked then fresh underseal for them

Did alternator 1 month ago it's a pain in the ass to do as space is restricted