Latest activity

I'll be off to get one today hopefully euro.has.one as getting places is a pain at the moment and need to change the oil today ,is that correct though land rover technicians drain it from that pipe instead of undoing sump or rounding plug head ...

Hello everyone I have recently become an owner of a 1999 4.0 P38 , yesterday the air suspension will not raise , I just have a light on to show I am in access height and a constant flashing light on standard height No warning lights on the dash...

Just be careful the thread isn't stripped out of the aluminum bracket. A dab of thread locker or Loctite on the bolt and it should be OK 👍

Camshaft related, so. Possibilities are: Oil pump Skew gear Dizzy Fuel pump Rollers Followers Push rods I'd start with the rollers, can be seen from the engine side by taking the side plates off.

FL9 the fusible link is the one that had blown. I changed the relay and compressor yesterday, then the FL9 started to look rough again before I took it out to stop the compressor from running. I have had a look quickly under the fuse box and...

It was a Jap Import ;)

Wow. A freezer in the Impreza? That’s some optional extra there!

I spent all day yesterday ignoring this thread

Snot true. Me oinker is feelin the heat, so we has been sharing the garding sprinkler..

Think of how much easier it will be for the next person searching how to increase fuel economy with differentials. They’ll be giddy. It’l be like he did all the work for them

Hi, which fuse exactly? No, at this point the first suspect is the fusebox or in the worst case the SLABS ECU unless it's a wiring issue somewhere and that coud be a nightmare.

GO FOR IT!!! :cool: I know that car... from 100 years ago 🤣 But there aren't many that I haven't seen - there was 36? in NZ when I had mine, I think. (It used ot have the plate "DECAF" I'm wracking by brain to think of the last owner though -...

What a price… first bush & there off.

Typical teatterer. Any eggscuse not to avva baff.

Hi, I just thought I would introduce myself. I am Gordon from Christchurch, New Zealand, and nearly a year ago I bought a nice green Discovey 2 V8. The plan is to do a few minor fix ups as a bit of a hobby, and explore some of our nice back...

Monty Python?

Definitely a case of "looking worse before it looks better." The corner vertical frame member was not very solid, so I ended up removing everything. The inner vertical frame members and wood looks good. I'm having a new outer skin fabricated for...

Winnie is going under the knife to repair an older, slapdashed repair by the army guys. While in service either someone ran into the left-rear corner, or the driver backed up into something. They replaced the vertical corner box section, the...

Or pronounce the word "road" quite right!!!!! 🤣 🤣 🤣

Well I have had quite a day. Mornng went shopping, nothing new there, then meet up with Dutch friens again nothin new. Then home and big lunch as we are going out to jazz in the evening, so we got outside bangers and chips. Then off to the...

Joking apart.... Do look after yourself!

Each piece stamped with "now wash your hands". Dead right as it was only useful as tracing paper!!!

Penguin on a stick!

update: put the dizzy back in and took the timing chain off aswell as the rocker arm assembly. put a drill on the bolt of the timing wheel and “dampened” the pushrods with my arm. after getting up to a certain rpm; i hear the knock. i dont hear...

I use the Carlube stuff but other firms do ATF-U (Millers and Triple QX to name two) so if you can get them and as long as the spec is the same I should imagine they would be okay, but others may advise.

Evening all, after picking your brains again... A couple of weeks ago my air compressor on my D2 for the rear bags kept running after the engine was off, this resulted in a knackered compressor. Today I have fitted a new one with new relay and...

That merc is absolutely lovely. One of those would be in my "modest" classics collection if I won the lottery

This thread has been quite the read. 270 posts in a matter of days and presumably it'll keep going. I'll be honest, I'd be fascinated to see the outcome...

Good to see some unrelated chit chat going on here, and no non-ignoring of the OPs thread