Latest activity

No squiggle is inherently evil. Some squiggles however, make poor life choices. It starts with just one nut from the hands of a human, then two, then three. Until the poor squiggle is so dependent on the human nut supply that he forgets how to...

I would only buy one diff at first to see if it fits, but I would definitely not drive around with two differentials with different ratios. But given the information that all of the L322 have the same part numbers for the drivetrain and the same...

Does the new tank go in from underneath?or do I need to remove the seat box / frame from above?

I'll test the new one before I put it in!

Actually my question was if it was a crazy idea, not if anyone had done it. I received a lot of abuse without any actual substance, and some abuse based on data but the data had nothing to do with the conclusion that caused the abuse...

Does anyone have any recommendations on oil brand?

About to clock off work, enough has been ignored for today.

The original freelander 3 was rebadged, discovery sport. JLR wanted to move away from the freelander brand which was a shame fl1 and fl2 were/are pretty good cars yes yes I know we all take the ****. The discovery sport however not so much.

Yuk🤮🤮.

We don't have the answer because I doubt anyone has ever done it. You can update the Internet when you have done it with the outcome.

Ours did that when you filled over half way. Found out when driving back when we bought it, brand new mot aswell.

Nah, The twist in the story is Ratty done it (on the last page) :eek:

I wasn't going to comment again here but given the stupidity of your comment I had to respond. If you actually read the 10 pages you would see the number of times I have stated that I have no issue with fuel saving. So either you didn't read the...

It's only a name, you can hardly expect it to be the same as the old one or it wouldn't be new.

Just in case I'm still ignoring.

Ok. Thanks for the information! Tank has a healthy amount of rust in it! Think I will replace. I've searched everywhere for tge leak.

Thank you, much appreciated. I did find the spec for the valve dimensions, 1.9 inches unloaded, and they are all at that length so that is excellent. Good recommendation on the camshaft, I will take a look. I did buy valve stem oil seals, only...

It part of a range rover sport wiring loom according to my very quick search of the part number. If location is behind the dash will be connected to a screen or head unit. So back to work, hopefully it helps 😊...

Ok Stanley ! I think I've found the right shema. If someone can give me a more detailed explanation, or point me in the direction of a link that will explain exactly how to proceed once the transmission has been filed, I'd love to hear from you...

Afternoon all, I will try to catch up later. Came home to a garden party last night :vb-party2::vb-party2: A few beers were sunk :vb-party: Might have had a wee dram or toooooo...

Hi all, I had the D2 mot'd then re-taxed it at the end of February then set about replacing the leaking ACE pipe. The leaking pipe (bottom of the valve block) came out of the VB ok but despite it being one of the two piece pipes you have to take...

Useless thread & a ****en stupid idea tbh, 10 pages of drivel with endless ideas & help all answered with negativity. Who buys a 4.4 petrol then moans about saving fuel. 🤣 🤣 🤣

So, with the good weather being back, I am halfway through cleaning out and restrawing the henhouse. Tis funny the way they fuss around when I have to invade their space! And once redone they'll be back in moving the furniture around until it is...

You REALLY should start a YouTube channel with all this, you'd soon be able to give up work!! 🤣

At that mileage springs will not be a problem, the known weak point of these engines is the camshaft, so you might want to check that out and the oil supply to it. When you measure the springs they will be bound to be slightly compressed...

Anyone that needs to buy a Nano nows your chance. Doriz has one open for all p38s

weird though, since i redid all of them

yep agree

I do not know this differential and I cannot see from the pic down the hole where the flange goes. There should be a nut underneath all that, that holds the pinion in mesh with the crown wheel. If there is and I am pretty sure there must be...

Thanks for your advice, measuring the springs makes sense – I will find the specification