Latest activity

Bit like my D1, it sat in dry storage for many years. What year is it, it looks very clean. I think it's easily worth the asking price.

Not a large job at all. They are riveted just riveted into place. Through the line of holes you can see In The picture. Will take longer to paint to match than to actually fit!

Have the Roma overdrive unit fitted to are TD5 for long haul trips makes a big differences in fuel, noise and comfort no effort at 70 but also wish I had fitted CC would have made it even more usable, but now we no longer do the 1250 mls non stop...

Give him £2k that leaves a bit of money to sort the head out.

I confess to not being an engineer, but don't have to look far to find a level of irony in your plan. As I understand it you want to take the best Range Rover model the old Rover Co (latterly LandRover) ever made, renown for it's ability...

OK ... Like this ?

Foolishly I used a recon unit and it was about the same time I realised that recon units these days are not what they used to be! Having said that, it’s what I have so… I find that tightening the 6mm adjuster on the top by about 1/8th of a turn...

Direct from the battery via a fuse and relay.

It look's like it's been run on radweld (horrible stuff) which always leaves a speckled residue like that.

This is the pipe from underneath you can see the coolant dripping. It's fixed by 2 jubilee clips, and is 90°. My concern is I'm getting coolant in places it shouldn't be. Is this part of the coolant system?.

.. double post ..

Well there are many who spend 2-3 thousand on buying just a chassis with upwards of 5k fitted so I don't see how it couldn't be a good buy. You can get them cheaper but unmolested 3 doors are few and far between.

So @Grebby suggested you check the fuse ... did you find it was blown ? Did replacing the fuse and disconnecting the "To Negative/High Beam" yellow wire get your headlights working again ? You don't connect it to the live feed for the...

To quote our transatlantic friends .. there 'aint no substitute for 'cubes.

Looking to replace my rear quarter panels…the lower panels sat infront of the rear wheels and behind the 2nd row doors on a 110. How big of a job is it to do???

https://www.ebay.co.uk/itm/256810789650 Is that it?

There are two neutrals, 1 in the main gearbox and 1 in the transfer box. The main gearbox (R380 or LT177) drives an output shaft which typically spins faster than the engine in 5th, the same speed when in 4th and slower when in 1st 2nd and 3rd...

Replace it with the same engine but one which works. Have you looked on Ebay maybe?

Are they not a straight m6? The other captives in the pillar for the toe plate seat box etc are.

I have one like that, I like the adjustable plate on it so the weight isn't hanging on the pedals and there is no gap on the floor.

What do you mean by set it up? Any adjustments will be in the workshop manual but don't discount the fact a recon might actually be no good. Half arsed recon would mean change the seals and paint it black. Remember you also have the UJs on the...

How long have you had it? Looks like stop leak stuff someone has put in the rad/coolant system.

Evening lads and lasses, I’ve been offered the below Discovery for sale, she’s been stored for last few years but it’s unmolested, non sunroof model, pretty much rot free aside from a couple of scabs on the rear safari windows, chassis is mint...

Possibly metric fine thread (1mm pitch) as opposed to metric coarse (1.25mm pitch).

Hi this is my 2nd attempt at this post. I have coolant dripping from this red pipe, it's connected with 2 jubilee clips and is a 90° bend. Can anyone identify it? The picture is taken from underneath the car. My main concern is that coolant is...

Hi all, first post! I have acquired a 2004, 1.8 petrol, XEi, 3-door My aim is to turn it into an off-roader The head has blown so I need a new engine. Could anyone recommend the finest cheapest replacement please? Could the V6 lump be put in...

I reinstalled the injectors, each with an audible click upon reinstall so I know they’re all seated properly, however 5 still has no lash, even before I bolt down the rocker shaft. The injector spring itself might be slightly higher than the...

At the moment we are nocturnal just to hot in the day went down yesterday even hotter but thunderstorms forecast at the weekend with 6inc of rain we desperately need it for the plants and the forest fires 😯

10mm deep! Should be enough to tap a thread, bit of thread lock and put a screw in.