Erm, No.
A VCU never turns freely - unless its been frigged.
Erm , No.
Testing on a car with 5kg and 1.2m bar is not pointless - absolutely far from it. You, yourself, publish why...
3.0 kg . . . . . . . 80.0 seconds
4.1 kg . . . . . . ...
We bought a downed LR4 this week that was throwing error codes the owner was tired of chasing. My wife has a Series 3, I have a Disco 2, so we figured a Disco4 would be a good family hauler. I know about the timing chain issues but want to...
I have spare injectors for the TD4 where are you based in the UK i think i may have the connection plug also with some wire connected to it, which i will double check tomorrow if you still need, drop me a message if you do.
1
Out and about for a couple of short motorway trips, Ashford to Broadstairs (sounds a bit posher than Margate) and before that Ashord to Folkestone and back. On the way back from Marstairs approaching folkeston the "brake worn" light came on. Got...
Todays happenings...went doon to my new boat which I paid for btw but not alot.
My mate who had been working on it recently said one of the exhaust manifolds had a hole in it so I stripped it off & took it home
& started striping the riser off it...
Thanks. Sounds good. I'll go through them on that basis. I'll look for a glow plug one.... Yes, I have a fuse box cover, but it doesn't refer to the relays....
Traps cleaned out wiv water butt water. Put some ov last nites stake fatty meat in. Some on said trap and a bit by both door oles. Few nuts left out to make kev fink fings are normal. Traps setted.
It could be that you have two different hubs on your axle. Some are 'hub centric' and fit alloy wheels whilst others are 'nut centric' and fit steel wheels.. 1994 is the changeover year I think ...
Not sure if you mean, did I forget to put a spacer on one side or not but I definitely did! All 4 the same mate. I'd be very embarrassed if that was the reason!
Are there 4 holes and definitely coolant not oil?, they’re not on the 5mb but there are bigger ones on my engine on other side, think my 200di has some but sealed off with silicon poss on other side
Can you stick a wire in see how deep they go...