Latest activity

Thanks for the advice I’ll look into replacing both arms then

Put all 4 bolts into box. put on steering arm Turn steering(engine running) a few times to center everything up Then do that mounting bracket up. No bushes etc on the thread just that big washer

Nice forward control coming up for auction in Lincolnshire on 5 July if anyone knows someone looking for one.

Hi to All. My name is Greg been looking in here for a while and decided to join. Although I'm a newbie here am not new to Landover ownership as had a few Lr's over the years.

Basically brought it as a non runner .. push start/stop button was cut off .. not sure if it was a stolen/recovered before as it didn’t advertise that. When I tried to start (by just twisting the wires together on start/stop button back on to...

Us boys grateful fer yer kaind forts. Us be ketchin up wi’ jobs us cudden du lars year (garden be as muddled as Starmurs brain case, frinztanz). But us be wurkin agen an gradjally geddun back tu skware wun. Opin WL & DD are ok anorl!

I already checked all the wires and connectors but everything looks fine

Well it isn't re latching on its own when I pull or press the lever. The noise sounds too consistent to be stripped gears. Maybe that is wishful thinking. The unjam procedure with the Gap tool hasn't worked. (Silence, nothing happens when I run...

Yeah, about right - backup is a bit less, but yeah about that - they go around the left side, not the right side...

I’ve just checked with a colleague - 40’ container UK to Durban or Cape Town is currently $2675 US., quayside to quayside. Appreciate that’s just the sea ‘movement’.

Thanks Freddie, the very same place I found. Glad you’re happy with it. 👍🏻

done enough over the decade to know the ride home "up" isn't for me.... down to Cape Town maybe fun but then still need a boat back up

You're kidding - that's cheaper than 2014 when we came out here - shipping is actually one of the few cheaper things - and that covers all exporting / deregistering/importing / MOT and into UK plates as well, not just the shipping The 90 I don't...

Recently bought a Fairey Overdrive off of eBay and noticed the linkage comes through the seat box, I however want my linkage to come through the transmission tunnel, any clues as to why the unit is currently configured this way and what I need to...

Which ECU is fitted ?? Unless someone has messed with the wiring, it should not be possible to fit the wrong type. Also are you using the correct Nanocom menu ? TRW MPS (TYPE 1) TRW SPS (TYPE 1)

Brilliant, thank you!

Finally got around the replacing my leaky steering box this afternoon. the new one has only been sat on the bench since February! Was a much quicker job than I remember, last time I did it on a running vehicle (rather than dismantled rebuild) it...

I recently fitted a cheap one on my daughter’s F1. Easy job and works fine. Ordered here; https://carwindowregs.co.uk/?gad_source=1&gad_campaignid=19304879901&gbraid=0AAAAABnU4nvmgZzNYpVQXL4WH3NAOx1Yi

3 dogs through some of the worst counties in the world to go through.... no thanks.... kind of wanna get home :-) 1 in the UK (the camper) is the right answer, providing I can insure it and store it, and if I want to sell likely get more in the...

Head would be sell the 90 and keep the 110

Very different these days.... very...

not quite - way cheaper here - not appraciating anything of quality and I specc'd top end now paying :-) The 90 isn't practical, so likely go - but the 110 is a tricky call...

Today i removed the center console to get to the srs unit. It looks perfect no corrossion on the connector or the pins. Still all original with the date stamp stickers. So this connection is good. Is there a way to test or measure the srs unit...

Hi All, As per the title, the OSR window failed halfway up at the weekend. There were a few weird noises just before failure - no grating, humming more like something I’d imagine if the wire has snapped and the motor is pulling it along. I’ve...

The noise from the epb just meant it needed adjusting/cleaning . You can view this and how to re latch and if needed rebuild it you look at LRTIME on the tube they have proberly the best how to guide on there. A new genuin epb module last time I...

Nothing wrong with the TD5 today, loads of grunt

I don’t know if I fancy a V8 too be honest and pointless trying to swap it to td5.

Mine is limited by the ECU to 90mph, as standard out of the factory. And it does it no bother. Nobody in their right mind should want to go faster than that in a tratter on public roads, I tend to cruise at 60 with occasional 70mph.

3 kids in 2 weeks? Blimey, she must be knackered and a medical marvel. 😁

So here is an update to all of this. I found this fuse to be blown. (Yes, I know. I didn't do that bodge, let's stay on topic and for now assume it was for a benign reason) Having replaced the fuse I have my fuel gauge back and the vehicle is...