Latest activity

This ! 👍

Thanks Mike. Now I know it has a Handbrake warning light I can fix it, the switch is dodgy and will need replacing, but there is no voltage on the wire meaning a blown fuse,broken wire or blown bulb causing the open circuit. Can you tell me which...

That seems bloody expensive. I’d be doing 1 x 40’ container - fill it with 2 cars and your other junk stuff (use the space in the cars also), and ship from/to ports that prove the most cost-effective. I was recently talking to some guys doing a...

Sorry to hear you're having issues on ebay, absolutely not uncommon by the sound of it. These mouth breathers walk amongst us unfortunately!

Oh, and that was after someone else cancelled a bid saying his “larl cuzn” got hold of his phone and clicked to bid!

Surprised you noticed any difference there 😁 (Is there a fasterer tratter then, cos I ain’t seen one)

Relisted, 3 bids, winning bidder cancels because he found out the “PROJECT”, which I stated I couldn’t finish repairing, which he saw photos of as per this thread, didn’t have a current MOT so he couldn’t drive it home! 🙄😡

So after following your advice I clean up every connection and attaching the lose wire to the frame I got the car to startup nicely but the car struggle to stay running idling. Giving a bit of throttle make the car idle better, I don't know if it...

My tratter has never, ever, failed to get me to my destination. It once got me from Plymouth to Grantham, and then back down to Kent with a burst booster hose. A bit slow, but it got me there. :cool:

Bear in mind that they don't salt the roads in Japan so that rust may be a lot more superficial than it would appear.

Did yer tratter make it out of the dump?

Just back from a tip run. I love driving me tratter, bestest car on the planet. While I was in there, I spotted a Flymo that had been dumped, I asked the attendant if I could take the top cover from it as mine is bust. He let me take it :D so now...

Fired up the green P38 for the first time in several weeks. EAS went straight up to correct height. Loaded up some garage rubbish, cardboard, an old freezer & load of empty beer cans, and off to local household waste centre. What bugs me is...

Web forums exist due to the information donated by their members. Web forum running cost is exceedingly minimal. Nothing more than a minuscule amount of advertising revenue is required to reach financial parity. We are WAY past that point. The...

Didn't do anything with her today *yet*, might just be able to pick her up this afternoon so if everything works out on my end, the car is finishes with loaner SUs! Really looking forwars to it, as is, surprisingly, the whole family including my...

@Chalky, thanks for the feed-back! If everything goes well on my side, I should be able to pick the old lady up today with a set of loaner SUs! Long term, I do tend towards a weber now, less risk of going obsolete and overall more power, which is...

It needs old fashioned engine basics rather the repeated diagnostics, i.e. Clean or better still replace spark plugs Test injector spray pattern & clean them. It's easy DIY using a kit like this https://ebay.us/m/cNgk6I Compression check all...

Wanna say big thanks for still been a active member and being such a help to try sort things I replaced my bwm "mod" cyclone filter with a a standard one with a new lid and seals again big thanks considering I replied from a Google search post...

Correct guess. Once I was home mate dropped off my reader and low and behold only 2 codes amazing how much easier it is when u have ur reader, never leaving my side again thay thing 🤣 thanks too all who helped and suggested things nursed it home...

$4k each - already priced up - 20ft of possessions = $8000, add on 20ft to make it a 40 footer - $11500, I guess one more would be a little more.... or don't bother with the home possessions and just ship the 2 Landies? I'm sure the missus would...

possibly this too? https://at-manuals.com/manuals/zf-4hp22-4hp24/

does this help? https://classicroverforum.net/index.php?threads/zf-4hp22-step-by-step.34993/

level 5 for roughness on cylinder 1 is at idle. the engine vibration and rotten egg smell is strongly felt in the cabin when driving. I have no fault regarding the injectors?..., and the plug (picture attached) removed from the cylinder 1 was...

Thanks for all this. I think I'll start with the Deadn from Dodo and see how I go. I'm intending to put the Exmoor rubber mat in the front anyway - so this should help. And I will get a rubber mat for the back as well.....

bet yours is nice though so probably worth it!

10k for galv chassis fitted… oh my god. if i was paying someone to fit a galv, i would anticipate never selling it in all honesty. I’ll just be waiting a while until i find one i’ll be happy with that’s ok price and needs some work but isn’t...

Put them both in a shipping container…

MAP sensor f4 From the manifold they clogged up, all you have to do 9 times out of 10 is remove them and wipe them clean. 1 2 3 4 5

Btw, would not let mine go for less than 10k, if it was on the market

I lived just outside nairobi in the late ‘70’s and it was reasonably safe then apart from the driving. But what I’ve heard about it over the last few decades, I wouldn’t go back