Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • L
    lynall replied to the thread Series 2 Colour code.
    S2 parts catalogue
    • Screenshot 2025-06-25 at 16.17.23.png
  • B
    basquen replied to the thread Disco 1 D1 ABS.
    I've started to run through the diagnostic guide. Solenoid valves resistance, all close to spec: Front/Rear inlets 7.2Ω Front/Rear outlets 3.9Ω Wheel sensors resistance: Front left 987Ω Front right 988Ω Rear left 987Ω Rear right 988Ω (same...
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    So does just getting the certs cost £5k? Fink its illegal to not be certified.
  • landowner
    landowner replied to the thread I would just like to say.
    Arrived, 230 miles at 70/75 and showing 43 mpg Happy with that 🙂
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Wow! That depends on the house I guess, but that sounds way over the top. Used to be you could DIY and then call the electricity board to come and do a safety check. Nowadays everything has to be NICIEC certified (or whatever has now...
  • Stone56
    Stone56 replied to the thread I would just like to say.
    Done a crate of beer this week all ready will need to get extra if this temperature carries on , or get fizzy water 😕
  • Stone56
    Stone56 replied to the thread I would just like to say.
    Depends on the number of out lets each socket is normally £35 then if a new board with trips depending on type but with a rewiring more work is involved floor bords lifting chasers and plastering?
  • Stone56
    Stone56 replied to the thread I would just like to say.
    I normally put a drop of iodine on and thay let go but that one had got it's head right in deep would not let go , we put tick shots on the cat perhaps I should try it 😕
  • Stone56
    Stone56 replied to the thread I would just like to say.
    Wow get 40 out the defender at 70 mph 😮
  • Stone56
    Stone56 replied to the thread I would just like to say.
    Dust pan and brush to clean it up then and wash the walls down He can smell you need to rub the trap with composed
  • Stone56
    Stone56 replied to the thread I would just like to say.
    Dust pan and brush to clean it up then and wash the walls down 😯
  • Stone56
    Stone56 replied to the thread I would just like to say.
    Got her rats mixed up with her hedgehog 😗
  • tottot
    tottot replied to the thread Series 2 Colour code.
    Wheels are Limestone
  • R
    Hi , new to forum. Disco 3 from 2007 . Just changed Compressor as advised by L.R. diagnostics. All seems good after re checking all couplings. Now the dilemma. As I get to my driveway on the right , steady up hill from the main road all is good...
  • W
    Wildefalcon replied to the thread Series 2 Colour code.
    I share your struggle. Mine looks similar, but sufficiently different so that the standard rattle cans don't match. I'm sending a sample to paint man, asking for a match
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    I ain't no expert but have done loads of domestic elecs for myself. Assuming 2 days for a spark and a mate, £1000 should more than cover the labour. Add say another £1000 for materials and profit. Total 2 grand.
  • P38Seb
    Very rude. Noticed it and as I pulled myself further under the car it just kept getting bigger.
  • steve2286w
    Mine is pastel green, of course the other green is a lot darker Pastel Green - 1 litre tin. Brush or spray. SKU: LPG 1 Excl. Tax: £12.95 Incl. Tax: £15.54 Limestone - 1 litre tin. Brush or spray. SKU: LLS 1 Excl. Tax: £12.95 Incl. Tax...
  • U
    uytter replied to the thread series 3 109 24v electrical issue.
    so I try to follow the wire, starting with the cable connect to the plus side on the batteries, it's leading under the car and connection to an intersection, there are 5 cables, 1 coming form the batteries 1 going to the starter, 1 going to some...
    • back of valve wider view.jpg
    • front wing fuze.jpg
    • small cable going to motor or look alike.jpg
    • front of valve.jpg
    • fuse box cable.jpg
    • plus cable going radiator.jpg
    • cabin plug.jpg
    • back of valve.jpg
    • free cable.jpg
    • diagram.jpg
    • 5 way intersection and starter.jpg
  • kevstar
    kevstar replied to the thread I would just like to say.
    What price do peeps think it would cost to totally rewire a small 2 bedroom house. The house next to us has been sold & for 2 days work to rewire it he's been quoted 7.5k :oops:
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    When we or the dogs get one we put white spirit on it which they don't like then take it out very carefully with either the proper tool or tweezers. I believe the problem occurs when they have satiated themselves with your blood and then inject...
  • steve2286w
    That’s a good bodge last ages can’t see it taking any weight if it’s just a sensor. I had mine out a week ago on 10 mile bumpy off road, noticed the vacuum and washer bottle shaken off its corroded mounts on inner wing, so I cut up last of left...
    • image.jpg
    • image.jpg
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    Oh dear, oh dear, oh dear. 😭😭😭 Hope it does her good. Give her my best wishes for a rapid recovery. Crossed fingers for you both.
  • Joseph80
    Hi everyone, you may remember me saying I purchased my first Series 2. I am trying to get it sprayed in the light green. But I am really struggling.. What colour is the attached pictures? Is it: Heritage Pastel Green LRC005 Or Grasmere...
    • PHOTO-2025-06-25-09-46-19.jpg
    • PHOTO-2025-06-25-09-46-18.jpg
  • norseman
    Told my Classic to stop complaining about getting a little more use over the past 3 months (might even cover 1000m this year) & being parked in the open for the past 17 years .. though I did wish it a happy 38th birthday & promised to rectify the...
  • P38Seb
    Yep - they did also find a tiny seep on the compressor where the hoses connect so I’ll get some fresh o-rings at the same time. In other news I was under the car and have found a frankly hilariously sized hole in the y joint in the exhaust..
  • GrumpyGel
    G'day @proto57 - nuther interesting story :cool: You do have an innate ability to find Freelander parts suppliers knocking out product that is not in spec! I wonder if you've found another global phenonomen. (that last word is underlined, but...
  • W
    Good, batteries wired correctly. Now, your machine doesn't have standard Landrover wiring, it has lots of continental fuses, and this I can only assume lots of split out circuits on top of the Landrover loom. However there is most likely to be...
Back
Top