Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • M
    Malamuteracer replied to the thread NNW504660.
    Hi mate, I think I need your assistance. I've tried to connect thr battery in, after 10 seconds the battery started to over heat, steam started to come out the overflow valve on the battery. I was maybe thinking the alternator?
  • tyregeezer
    tyregeezer replied to the thread NNW504660.
    Thanks mate, but more like a sort of madness
  • sierrafery
    sierrafery replied to the thread Starting issues.
    I'm not sure that the scanner you used is reliable but if it is i see that the fuel pump drive is off so you can't expect it to start that way, the pump should be on for about 3 minutes after the ignition was turned on then if the ECU doesnt get...
  • stumpyj
    stumpyj replied to the thread Starting issues.
    • 1000028259.jpg
  • R
    resto_d1 replied to the thread Crows...bear with me.
    Ensure you’re on the right side of the law. I personally this GL42 is insane but still work to it. I’ve got a perm where an elderly lady with hip replacement has her paths and tractors decorated by pigeons. Piles and piles of sh!t. She no longer...
    • IMG_7843.jpeg
  • Hippo
    Hippo replied to the thread I would just like to say.
    Can yer use outlook instead?
  • Hippo
    Hippo replied to the thread I would just like to say.
    Restarting windows gives a clean boot. Same as telling it to shut down then pressing the power buttom to start it. Yer dun't need to kill the battery. Does LZ wuk wiv firefox web browser?
  • stumpyj
    stumpyj replied to the thread Starting issues.
    Thank you for your replies - Ive looked through the videos and to be honest I havent considered a fuse being part of the issue. I plugged in my pscan this afternoon and ive attached the readings - I just crank her over and then took the readings...
    • 1000028261.jpg
  • J
    John_l_k replied to the thread Rear door trim clips. 1998 FL1.
    Back to nearly concourse, and with £3 still safely in my pocket. That's what I call a good day 😎
    • IMG_20250622_185726.jpg
  • Freddie17
    Freddie17 replied to the thread Crows...bear with me.
    The OP is welcome to borrow some of my decoys. Crows tend to complete ignore them, too 🤪
  • J
    John_l_k replied to the thread Rear door trim clips. 1998 FL1.
    South Coast UK, near Brighton. And really good to know, thanks. At the moment it's just these little bits and pieces I need, luckily.
  • andyfreelandy
    Not sure where you are but I always have plenty of used FL1 parts. Just PM me.
  • J
    John_l_k replied to the thread Rear door trim clips. 1998 FL1.
    Excellent, thank you. I do have a list of bits to source so that will be of great help.
  • andyfreelandy
    This may be helpful to you in the future https://parts.jaguarlandroverclassic.com/
  • L
    Hi everyone, I’m new to the forum and would like some valuation please. I have been a long-time owner of a 2006 Freelander TD4 Auto (Freestyle). It’s finished in black with half leather heated front seats, original 6-CD changer, tow bar, and...
  • andyfreelandy
    EYP 101280 if you want the LR number. They are 50p each !! Any black or painted self tapper would suffice.
  • J
    John_l_k replied to the thread Rear door trim clips. 1998 FL1.
    Great, thanks, no need for a special order then. I'll see what I've got at home. I love it when it's a simple fix 😁
  • andyfreelandy
    Held with Torx self tapping screws. All 6 are same size. Can measure one but about 3mm estimate.
  • H
    Hicap phill replied to the thread Crows...bear with me.
    Have you tried to put a white plastic bag over the wipers? (If I remember crows when the hatch have white feathers when born & until they turn black,crows won’t feed them) Theory may mean they leave white things alone
  • P
    Hi just about to replace front wing, how do I isolate it to stop the electrolysis? I have plastic washers to isolate the screws. When i removed the original there wasn't much between the wing and the inner wing along the top. All that there...
  • UpandOver
    Rear hubs back on with some drilled and grooved discs, had to order some different caliper bolts as they arent the same as the front 😖 the early def had 7/16 unf bolts unlike the m12 fine front ! Have to pause the front hubs as I need to order...
    • IMG_2775.jpeg
    • IMG_2776.jpeg
    • IMG_2773.jpeg
    • IMG_2774.jpeg
  • F
    Some years ago I had an intermittent fault, a slight hesitation rather like a missing on one cylinder, checked everything i could, wiring harness etc with no result, was about to change the pedal thinking the potentiometer wipers had probably...
  • J
    Hi again, Just wondering if anyone knows a part number for the clips/screws that hold this rear door trim down to the floor? And are the 6 clips the same as the middle 2 holes have different coloured (black, not yellow) mating parts? Thanks...
    • IMG_20250622_173811.jpg
    • IMG_20250622_173818.jpg
    • IMG_20250622_173822.jpg
  • J_D
    J_D replied to the thread Freelander 2.
    Whooshing would probably be pressured side of the turbo. Only takes a small hole. There is a weak point somewhere that I've seen mentioned on here, a elbow joint that might even be plastic
  • E
    ExcrucioCor replied to the thread Chequer plate in rear tub.
    Aye, this is sort of where my mind was heading too, thank you
  • steve2286w
    steve2286w replied to the thread Smoking 19J.
    Maybe valve stem oil seals draining into cylinders standing or being sucked in with throttle off
  • L
    I posted previously about my Discovery 1V8, carb model, losing coolant and the difficulty of finding the problem. In a previous post I mentioned noticing that one of the cylinders had exceptionally clean spark plug compared to the others which...
    • P1030664.JPG
  • J
  • iamdimitris
    Posting pics of the installed Yokohama's after getting rid of the Trepadors finally. The driveability and comfort drastically improved and I can finally think of doing longer trips with the car. The performance of the Geolandar G015 are...
    • 20250419_082841.jpg
    • 20250417_173253.jpg
    • 20250417_115458.jpg
    • 20250417_173411.jpg
    • 20250417_115553.jpg
    • 20250417_171120.jpg
    • 20250417_171452.jpg
    • 20250417_170616.jpg
    • 20250417_115518.jpg
    • 20250417_115522.jpg
  • J
    Well I'll give it a trip to gym again in morning..it's 12 miles there and then 12 back today issue happened just after fully completed journey day before I got 2 miles from gym and issues started so once it stops raining here I'll pull pipe and...
Back
Top