Latest activity

Great, thanks, no need for a special order then. I'll see what I've got at home. I love it when it's a simple fix 😁

Held with Torx self tapping screws. All 6 are same size. Can measure one but about 3mm estimate.

Have you tried to put a white plastic bag over the wipers? (If I remember crows when the hatch have white feathers when born & until they turn black,crows won’t feed them) Theory may mean they leave white things alone

Hi just about to replace front wing, how do I isolate it to stop the electrolysis? I have plastic washers to isolate the screws. When i removed the original there wasn't much between the wing and the inner wing along the top. All that there...

Rear hubs back on with some drilled and grooved discs, had to order some different caliper bolts as they arent the same as the front 😖 the early def had 7/16 unf bolts unlike the m12 fine front ! Have to pause the front hubs as I need to order...

Some years ago I had an intermittent fault, a slight hesitation rather like a missing on one cylinder, checked everything i could, wiring harness etc with no result, was about to change the pedal thinking the potentiometer wipers had probably...

Hi again, Just wondering if anyone knows a part number for the clips/screws that hold this rear door trim down to the floor? And are the 6 clips the same as the middle 2 holes have different coloured (black, not yellow) mating parts? Thanks...

Whooshing would probably be pressured side of the turbo. Only takes a small hole. There is a weak point somewhere that I've seen mentioned on here, a elbow joint that might even be plastic

Aye, this is sort of where my mind was heading too, thank you

Maybe valve stem oil seals draining into cylinders standing or being sucked in with throttle off

I posted previously about my Discovery 1V8, carb model, losing coolant and the difficulty of finding the problem. In a previous post I mentioned noticing that one of the cylinders had exceptionally clean spark plug compared to the others which...

Posting pics of the installed Yokohama's after getting rid of the Trepadors finally. The driveability and comfort drastically improved and I can finally think of doing longer trips with the car. The performance of the Geolandar G015 are...

Well I'll give it a trip to gym again in morning..it's 12 miles there and then 12 back today issue happened just after fully completed journey day before I got 2 miles from gym and issues started so once it stops raining here I'll pull pipe and...

So plug the hole. Let the pipe hang down and try replicate my circumstances to see if the issue is persistent. I'll also try get hold of new orignal filter for oil breather

Yep, seen the listing, quite a reasonable price too ;)

Also on the perished hoses... I still have hard lines running down the chassis but I know some of the rubber hoses need replacing, to be fair maybe the tank does too as theres a good amount of debris caught in the filter. It could be a case of...

I was trying to avoid a rebuild as the carb itself has been on the Landy less than a year... I can see it has '21' in the casting so its not that old either. The one thing I haven't checked with the carb is the float level needle valve though...

Yes. Or for the protection of certain wild birds. Hence the slightly tongue-in-cheek “stick some rape or fruit tress next to it”. 🙄

I'm sure they need to be damaging to crops to do that.

Yeah I checked it, it had the upgrade mod on it I've replaced rhe rubber seal in tip of cap. I did have a crack in the lid of the rubber seal side but I glued it back for now. That's what I seem to also come back too tho it got be sucking hard...

Smashing - really appreciate the tip and your input. But hopefully I won't be in the market for starter motors for a while ;o)

I have done a lot of that and I empty my inbox etc regularly as I do my spam folder and deleted folder. It isn't just slow it simply isn't downloading new messages at all nor is it letting me send messages. Yet I can read the new ones on my...

That's a cheapy random aftermarket one then. I paid £160 for a Denso a couple of years ago, £180 seems the cheapest price now.

No it hasn't. 😠

I am now reduced to talking to you on my old phone 🙄

I could give you pounds shillings and pfennigs if my blasted pooter wasnt playing up. But basically we are currently paying in £138 odd to Octopus per month for both gas and electric similar to last year. So times that by 6. 😉

Try to find a Denso next time ... They really are buy-well-buy-once .... https://www.lrdirect.com/nad101240-starter-motor-td5 https://www.turnerengineering.co.uk/products/nad10240-starter-motor

Oh the brand! Fahren I think? I've thrown the box away. It was about 100quid.

The RAVE manual doesn't mention using an adapter sleeve.