Latest activity

Problem found!! Removed the battery light cable from the alternator stud and connected it to the alternator pin, and everything works fine! It would seem there is an issue with the alternator stud terminal - spoken to the supplier and waiting to...

Hot Hot Hot here today in Wimblowdriver Land. Put me sun parasol up and had a few beers on me patio. Bit of bird watching with me bins (no not that sort), was watching a buzzard high in the sky and spotted the first returning swifts. Summer is...

Hi, what's the knack to dismantling the cogs, ears and spindle for the rear wiper motor please ?

It could be as straightforward 😬 as solving a simultaneous equation with N unknowns. How many serial numbers and codes do you have @andyfreelandy? I am waiting to sign off to get my house/workshop/computing facilities back but I would give your...

And the tank is clean? You can get a blob of crap that floats about and can get sucked up to the pickup tube causing fuel starvation

Changed the fuel filter to rule that out and the pick up pipe and sender are new

Fuel filter choked or diesel bug in the tank at the pick up tube possibly?

NOT the red one - that will bugger the system.! LR recommend Pentosin CHF 202, but others will meet the ford spec. It is a green fluid.

Please help before I burn this thing. I had my Landy parked up for about 4 months and then I drove it for a little while then I started the rebuild. Prior to the lay up it was fine but since then and after the rebuild it has been shocking on...

It's not the a frame, and not quite a clonk. It's more of a click like something moves slightly at the front end but nothing is loose that I can see. This rattling through the steering has been happening since before the rebuild but the...

So clamped front hoses and got a solid pedal, so must be an issue with the front brakes. Clamped each side in turn and it appears to be front left. Tightened up connections and pedal now seems better??? Haven't tried driving yet though.

Certainly @MGT is ignoring the thread !

There's a >1999 on eBay for £300, but the pictures are blurry so who knows what condition.

I wonder which hose connect on the yellow circle mark ??? first one through the bulkhead, the hose was cut 2nd on the plenum

Nevva Well, not much...

Make sure to use the correct PS fluid...

Hi guys!! I really need your help, I have a 2004 TD6 Vogue which i love more than my husband.... yesterday she made a very loud clunking noise when i accelerated... so much so i thought the exhaust had blown or fallen off or something... until...

...that a very enjoyable trike ride was had. Only 10 miles but the sun was blistering hot and the breeze was warm. Avg. Speed a mere 12.8MPH with a bit of assist. Smashing!

From that graph, it appears that Bank-A is the bad one, however the Nanocom recording you share indicates Bank-B is not swinging through the correct range. This why we suggested swapping them over & cleaning the connector contacts. They should...

Not quite, but they is very, very flat. 🐬🐬

Flippin ot . Luckily the drier on the compressor in banjaxed so the air guns spray water ⛲

No, I checked with the belts loose. Should have taken the belts off shouldn't I :D. I'll check again with the belts off.

That is nice looking classic, great colour and a credit to you👌😎

Most upload to their YouTube account and then copy the link to the thread. If you've got an account that is😜👍

Hi guys, My names Gem and I have a 2004TD6 Vogue which I love more than my husband and yesterday it made a horrific noise... sounded like the exhaust exploding, I managed to get it into the drive but now it wont go into reverse. It made the...

Thanks ordered new one cats be nxt

Ohhh it won’t let me upload the video 😵‍💫 how do I get round that?

I’ve uploaded the noise. Also mechanic said there was no metal cuttings in oil or diesel filter.

Brought from auction. Yes I’m in the UK

Hi Update now mechanic is saying it’s more to the bottom end.