Latest activity

Rear drive shafts delivered today & now fitted. The list for my ref lol Paint & fit rear diff cover. Replace sensor next to starter motor, reverse switch, speedo cable Both propshafts Exhaust down pipe. Nsf brake caliper pipe. Found a bit of...

Thanks for saying hey! I'm not entirely sure I understand your point but for me, the fact it is an upgradeable Landy is why I love it. It means that unlike most other vehicles around, it can be whatever I want it to be. I get the die-hard...

Pikes having a wash not likely. 🤣 🤣

Is there a way I can test the alternator, not knowing where the fault is? I did write to the manufacturer but they haven't replied. The system is at 14.6v but either side of the diode I have 7.13 and 7.2v. My landy is a 1987 Defender 2.5NA, ex...

I'd just like to point out that I'm not posting about this thread and I am ignoring it, but that thread just doesn't cut the mustard. I think I'll definitely stay clear of it.

Things been going missing locally, stuff from gardens & the sailing club ect Silver vans apparently.

More than likely. There’s a lot about. They were at the river last week

GKN shafts are hard to come by now mind. Are there other reasonably high quality alternatives?

I don't have the special tool either and have just carefully tapped around the seal to seat it' I do second @miktdish above re the seal, those brown ones fit easy enough but do not last in this situation and many have started to leak in a few...

Hi Was enjoying a lovely evening not long ago sat on the tailgate of my 2006 L322, eating fish n chips and watching the tide come in. Then i had a thought "backrest would be perfect about now" Has anyone seen any anywhere or is it a case of...

Did the hare get propper phooked?

had a tip off that the was strange goings on at work tonight and found some of the travelling community exercising their lurchers in the middle of one of my silage fields.

Sounds really good 👍

Remember them tea towel holders like a cats ass 🤣🤣

A weeks worth of fire pit timber there. :p

Its clear though init so if its 2 stoke machines its tinted with what ever oil he's using. Snot hard to replicate coloured fuel. Mines is 90% cherry 🤣 🤣

Carry on gents I'm listening to you both. Oh that reminds me got to dig that new lime pit on allotment :rolleyes: :rolleyes:

Thanks Again. Cant get better seal untill next week, so just gonna use what I have got, bloody sick of getting held up waiting for parts to get delivered. Will have a go anyway then if it goes bad will have to order. . The seal I have is...

Thank you I’ll give them a try.

I suppose it didn’t help when he asked what they were in there for and i answered ‘just incase’

Are you free at the weekend Dan ??

Just tried that and It holds vac. Tomorrow I will try another distributor to eliminate that, it’s very strange! I’m starting to lose patience with the thing lol

I had a bag in wheel well but it had a hooked chain in there. For towing cut trees around.

If you look in the pic above (left hand side) the gloves and tape that worried him so are in there

Did you have a bag of lime in the wheel well? Don't answer 🤣🤣

HI, Almost finish the rebuild...still have to find the right place for the vacuum hoses. - I have a black ball with a hose going through the bulkhead, but don't find the way for the other hose ... - The vacuum pump should go to the cruise control...

Yes loads of fields and forests here. Miles upon miles in every direction. Never been to Yorkshire but I do know a Rubberknees

I'll probably be down during the day Saturday, but wouldn't be staying overnight, would be great to meet everyone though!

Again, not bitin...