Latest activity

Hi hope all is well guys its been a while. I am after some help regarding a 2008 discovery i have a intermittent fault on it some days its starts fine and others when i go to start it it doesnt crank theres also HDC warning message that comes up...

I've just checked my trip meter, 26.4mpg at average speed of 46 mph! that was at night with heating on as well, it may give better mpg going home during the day. 280 miles from home to here.

https://yrmit.co.uk/product/fuel-filler-neck-lr-defender-90-83-98-not-td5/

Pretty sure I saw one. YRM maybe

It could be a number of things. Start cheapest / easiest. You really do need to read the codes and data though

I think it’s a case of buying a disco 3 and hoping it doesn’t become a money pit…

So tastes of duck. :p

Rain has stopped (for now) much colder too. Pulled the front diff out & it looks good now to clean all the faces up on the front hubs ect & put the front end back together. Just wondering if I should just fit new front discs whilst its stripped I...

I'll try it mate I've got some. Wouldn't be related to pressure sensor would it

Londonistan 🤣 🤣

Yer & the poor wee chap didnt get a decent burial, just tossed in the bin.

Hi ppl, Is there such a part ( I’ve looked for a part on here on the parts numbers sticky) can’t find anything anyone got any ideas or do I need to fabricate sumit Cheers

Where/who are you using for galvanising ? Are they still charging per weight? (Not had much done for he past few years & good to keep up with the things)

I give in…

Any injector cleaner… Wynns, or ‘diesel magic’

Rain over night. Just enuff to wet the floor. Tis not wot eye were hoping for.

I’ve had two bulkheads galvanized so far and had no issues, if they do decide to drill a hole I can always fill it in with lead solder before painting, I’ve used this method on galvanized front bumpers to fill in the end cap holes. Beauty with...

As the weather is so bloody awful today think I’ll hide in the garage, plan is to patch up the bulkhead to tunnel cover (sand blasted revealed a few holes) then straight out the tunnel panel, clean up the heater box and fan and get everything...

Have you put a drill/drain hole on the door pillars of the bulkhead? They classed mine as a sealed tube & drilled a hole in each side Stuff always look good when re galved

All the steel work including the bulkhead and inner wings are back from the blasters, a few drain holes added to the roll bar hoop and they are ready to go to the galvanisers next Wednesday. Notice that I’ve attached some unistrut as a brace...

Had a similar thing on a car, that was the steering box.

I have the feeling you want something that doesn't exist, also no one sits at 85mph on the motorway anymore if you want to keep their licence. 200tdi will sit on the motorway at 70mph no problem. Now you don't want diesel as its too slow, you...

What's injector magic

Try these guys - call and speak to Sue. https://www.freelanderspecialist.com/ I know they can ship parts. Not cheap, but very reputable.

If it was me, I’d ‘replace’ - not repair or treat. Surprised an excellent 4x4 place does not offer this? I did mine myself, but most places ought to be able to quote you to replace them. New ones are readily available (your call, but personally...

2007 year 2.7 engine

Hmmm. Modulation is a tad high but I would expect problems starting hot rather than cold. Problems starting cold sounds more like glow-plugs or in-tank pump. I posted up a spreadsheet with a trace from mine somewhere. Or PM me your email address...

It is on nanocom. I seem to recall it's not on the same screen as modulation which is a faff, a minor faff but a faff nevertheless.

I'll try and compare to stock ones and see if there is any difference.

Is there a way of finding out the end user to whom/which a given contract was supplied and what the spec was? I have a pic of a 1995 300TDi military SV plate and am interested to know more about it. I recognise that there may be NDAs in place...