Latest activity

Tried a new cam sensor managed to get it to start by using accelerator pedal and it's runs but ****

Thank you, that probley explanes why you can't replace bulb with a l.e.d one then. ,

Exciting Easter Friday! Finally got round to sorting the slightly warped exhuast manifold, shockpy yes even the CJM Manifolds will warp given enough time. This one was on my old D2 now on my 110, probably covered closed to 60k at least and I...

Be easy enough to put a tow ball up on chassis and use a normal tow hitch I did it on my third scale artic trailer but with ball on trailer dropping into upturned tow hitch

Well it has been gently raining all day here today. So car packing has stopped. doing boring paperwork and filliung crates to go int Disco. Have a good evening folks!:):):)

No worries. Happy to help, can at the very least come for ride if you want!

I thort whiplash which has been classified as a "soft tissue injury" has now been knocked off the list of compo claims, or at least at a much reduced rate. Ex and I both got it once from a rear end collision. About 1991. We got precisely £300 and...

So does 7 pin s socket. I have fitted both sockets on the P38 and the last L322 I had but must admit I purchased the proper loom so it just plug and play for this one (2008 L322) but reckon I could have worked it out to fit both if had to. Don't...

Soz about all that.:( You seemed to be getting on so well before, noo job and all that.

Our one has a funny fault. We can put a load in it and turn it on, it then makes the sort of normal noise it should make before it srtarts then it simply doesn't but, sometimes, if I turn the drum round a bit it will start and go fine. Sometimes...

Got up to some tomfoolery with the "Hase Kettwiesel" trike and it is now a working e-bike. Just in time for Summer Fun. :) Set up properly for 20" wheels 6 power-levels, and max-assist up to 32kph (20MPH). As I am now ossified classified as "old...

While waiting for the high pressure gauge, decided to fit a spare HP pump. For info, no need to remove starter or coolant fitting, remove regulator so that you can get to the bottom nut, lift engine a bit with mount off and straightforward job...

That'll sit nicely behind a scooter

America isn't interested in that though, they want all fitted parts made there aswell. BMW have a massive factory there, the biggest exporter by value than any other manufacturer. Still the powers that be are accusing them of being parts...

Decades ago I would have said 'why not' but linking in to today's complex vehicle electronics could see your instrument panel light up like a Christmas tree :oops: But then I'm not a sparky, so waiting for informed advice would be a good idea.

Massive cloud going across and we as only had a quick sprinkle.

As my trailer has 7 pin ‘N’ type plug only and caravan has both ‘S’ and ‘N’ type leads. The RR only has a 7pin ‘N’ type socket on the chassis. So the reversing lights or battery charging dont work on the caravan. Could I connect a ‘S’ 7pin socket...

Thanks all, Managed to sort both wishbones. Tried heating, release oil. hitting, reheat, more release oil and hitting again. After 2days on one bolt on each side, they came out. Not much room on one side with the downpipe interfering access to...

‘Tis nice. Not that yukky Hobgoblin stuff though

Only 3 years late but.......

Dun't fink it would be worth setting up a factory in merka. Cost v yesrs to get back the investment ain't worth it. Especially when other countries production lines slow down a bit.

ok. It's a 2000 car so my guess would be the later filter, so good one to try next. For the FIP adjustment any links to photos or video on what to loosen & adjust ? The procedure in RAVE seems to be quite involved. Do all the injector pipes...

Need to test it in anger. Pic's or it din't happen. Purrem on t'other fred in AG.

It has justed started raining. Had to water me lupins and edgar last night as they were thirsty.