darius
Active Member
- Posts
- 254
- Location
- Kidderminster
twice i've had cars fall off ramps, admittedly i had the ramps placed across the side of a slope when it happened and the ramps rolled over sideways, i learnt not to do it there again
properly scarey as both times i was just crawling under
so be very careful on any slope
i've also had hydraulic jacks creep down slowly, so slowly that you almost don't realise it's happening, always use axle stands if you have to put any part of your body under a jacked vehicle
at 20quid an hour you could come here (B8 2SL), i'd happily supply tools and assistance/guidance/knowledge/welding, minimising the required worktime all you'd have to supply is parts/oils/gaskets/seals
local parts suppliers is minimal
the only problem is we'd be working outside but i do have plenty of level solid space where i'm regularly repairing motors (can fit 2 or 3 artics in my back yard) and if essential i have a large tarp to work under along with a woodburner to warm frozen fingers on
my last project and daily driver
![]()
Thank you for the offer
Very nice motors by the way.