Working on the landy on a slope!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
twice i've had cars fall off ramps, admittedly i had the ramps placed across the side of a slope when it happened and the ramps rolled over sideways, i learnt not to do it there again

properly scarey as both times i was just crawling under

so be very careful on any slope

i've also had hydraulic jacks creep down slowly, so slowly that you almost don't realise it's happening, always use axle stands if you have to put any part of your body under a jacked vehicle

at 20quid an hour you could come here (B8 2SL), i'd happily supply tools and assistance/guidance/knowledge/welding, minimising the required worktime all you'd have to supply is parts/oils/gaskets/seals

local parts suppliers is minimal

the only problem is we'd be working outside but i do have plenty of level solid space where i'm regularly repairing motors (can fit 2 or 3 artics in my back yard) and if essential i have a large tarp to work under along with a woodburner to warm frozen fingers on

my last project and daily driver
DSC00015.jpg

Thank you for the offer :). I'll PM you if I need to take you up on it.

Very nice motors by the way.
 
at 20quid an hour you could come here (B8 2SL), i'd happily supply tools and assistance/guidance/knowledge/welding, minimising the required worktime all you'd have to supply is parts/oils/gaskets/seals

local parts suppliers is minimal

the only problem is we'd be working outside but i do have plenty of level solid space where i'm regularly repairing motors (can fit 2 or 3 artics in my back yard) and if essential i have a large tarp to work under along with a woodburner to warm frozen fingers on

20 quid an hour to help out another member?????

Fook off :mad:

Come down to Stroud and you can use the same set-up, outside but level with all the kit you need

For Nothing..........except maybe a coffee and cake at the cafe down the road
 
20 quid an hour to help out another member?????

Fook off :mad:

Come down to Stroud and you can use the same set-up, outside but level with all the kit you need

For Nothing..........except maybe a coffee and cake at the cafe down the road

there you go someone that's prepared to give his time and tools up at any time that's convenient to you, you couldn't ask for a better deal, i'd take it

by the way BB tinkering on yours and other folks motors may be just a hobby to you, unfortunately for me it's not no matter whether i'm a member of this forum or not, you could always kick me off if you're in the position to if you don't like my previous post
 
Back
Top