wont let go !

mick dodd

Active Member

Posts

106

Location

st asaph denbighshire

• Jun 10, 2019

• #1

any tips on engine removal from scrap disco i have undone all of the studs & bolts but it doesunt want to let go so easily .the mount studs dont clear on lift will i have to cut them away from ftom the chassis?

 

blue beasty

Leaks an prone to bits dropping off

Posts

63,274

Location

Gloucestercotshirewolds

• Jun 10, 2019

• #2

mick dodd said:

any tips on engine removal from scrap disco i have undone all of the studs & bolts but it doesunt want to let go so easily .the mount studs dont clear on lift will i have to cut them away from ftom the chassis?

Click to expand...

Slacken off the mount to engine bolts

 

mick dodd

Active Member

Posts

106

Location

st asaph denbighshire

• Jun 10, 2019

• #3

dont think a socket will go on bottom bolts .thanks for tip ill give it a try ! will the clutch housing release ok ?

 

blue beasty

Leaks an prone to bits dropping off

Posts

63,274

Location

Gloucestercotshirewolds

• Jun 10, 2019

• #4

mick dodd said:

dont think a socket will go on bottom bolts .thanks for tip ill give it a try ! will the clutch housing release ok ?

Click to expand...

I'd kinda assumed if your trying to lift the engine out without the gearbox you'd cracked the bellhousing off already.

Slacken the gearbox mounts as well. The more wiggle room the better.