Wiring problem HELP !!

Hi , I've just got a 90 td 1985 the problem is the previous owner was going to replace all the rear lights so he's disconnect all the old lights and not mark up what colour goes where. I've just bought new rear lights but have no idea what colour goes were anybody got any pictures ? Any help would be very welcome. Thanks guys.

Not really engine related (should be in general land rover or defender/90/110) but here goes:
Green/Red- Left indicators
Green/White- Right indicators
Red/Black- Left tail lamp
Red-Orange- Right tail lamp
Green/Purple- Brake lights (both)
Red/Yellow- Fog light
Green/brown- Reverse light

If your tail/brake lights are anything like mine, they'll have green, red and black wires. Black is earth, red and green are the connections to the brake and tail lights (can't remember which way round it was). There should be connection blocks in the rear corners of the tub. You'll find a couple of spare wires as there's connections for fog and reverse lights on both sides (they're the other way round on LHD) plus a feed or two for the towing electrics.

Thanks mate perfect.

These are worth putting in your faves.

Lucas wire colour codes for Land Rover

Wiring and Fusing - BS-AU7 Colour Codes

I don't think the 19j was available in 1985 btw.