Landyfox
Well-Known Member
- Posts
- 4,489
Hi mate off the top of my head I'm sure you have two wires on the switch, one which goes directly to the fuse box and the other one directly to the lights. If I have recalled it correctly, you can either attach a wire to an empty slot in you're fuse box and run it directly to the switch and then an alternative wire directly to each lamp one at a time to test. Personally I would attach a test wire directly from the battery to the switch via an inline fuse if you have one rather than the hassle of the fuse box. This way you're eliminating variables. If this works it will be case of testing each individual wire and replacing! Hope this helps, as I say once back I'll have a look at mine for you and feedback!! 
