Big vee
Active Member
- Posts
- 247
- Location
- Near Kingston upon Thames Surrey
hi does any one know the trigger wire from BECM to ECU colour and location .
regards
:5bdriving:
regards
:5bdriving:
wire colour
- Thread starter Big vee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Which ECU there are a few. And to trigger what?
Big vee
Active Member
- Posts
- 247
- Location
- Near Kingston upon Thames Surrey
Ok, got up this morning...slowly....bloody Jamesons.... and went into the garage. No dash at all and everything I do wont change that. The BECM seems to still be working as the dash will still show ignition key in, bonnet open etc etc etc. However, it also showed ignition key in a few times when the key was out, and the accessories all work perfectly. there is a clicking in the BECM when the key is turned to start but nothing else, this is the problem i have been trying to trace wires becm is fine thanks to rick then i found the abouve from a aussie site they traced it to there quote trigger wire from BECM to ECU
it appears some idiot has poked a multi into this wire some time ago and due to me using the car for dumping jet skis in the water all week, the salt water from my boots has seeped through the underlay, through the tiny hole in the wire left from the MM and black wired it.
it appears some idiot has poked a multi into this wire some time ago and due to me using the car for dumping jet skis in the water all week, the salt water from my boots has seeped through the underlay, through the tiny hole in the wire left from the MM and black wired it.
