bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Can anyone tell me if I need to rip the dash to bits, or would it be possible just tae take just the top off?
Cheers
Cheers
wiper wheel box
- Thread starter bustersbus
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Griffdowg
New Member
- Posts
- 7,194
- Location
- Somewhere in Bristol
which bit you talking about? the bit that the linkages go into? if so, only the top needs doing ive done mine twice now cos the linkage kereps popping out and ****ing my wipers!
G
ive done mine twice now cos the linkage kereps popping out and ****ing my wipers!G
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Aye it's the bit with the spindle on with a toothed wheel inside two plates.which bit you talking about? the bit that the linkages go into? if so, only the top needs doing
G
Hopin' ah can get away with just takin' the top off
It'll serve me right for ****tin' it with a big hammer!!!!Cheers Griff
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
this is it
Griffdowg
New Member
- Posts
- 7,194
- Location
- Somewhere in Bristol
yer, top off should do it. use lockiung nuts or locktight on the threads of the 2 bolts holding the link rod... otherwise you will be forever tightning them, usually in the rain
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
if yer wanna remove it completely, then it's dash off. If yer jist wanna tweak it, then top off should be OK.
Only tricky bit of gettin the dash off is the flexi pipes fer the demister vents - them's bastids to get back on at the bottom.
Only tricky bit of gettin the dash off is the flexi pipes fer the demister vents - them's bastids to get back on at the bottom.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Cheers guys, job's done Did have to take dash off to undo the blower, wasn't too bad a job in the end just a bit awkward. Changed the washer jets while I was at it. The new wheel box came with lock nuts so that was a bonus
Now, just got these damn seats tae sort!!!!!
Cheers again
Did have to take dash off to undo the blower, wasn't too bad a job in the end just a bit awkward. Changed the washer jets while I was at it. The new wheel box came with lock nuts so that was a bonus Now, just got these damn seats tae sort!!!!!
Cheers again
Similar threads
