Wiper spindles on bulkhead swop

Hi , am in the middle swoping the bulkhead on my 1988 v8 90. Have noticed the holes on the new one for the wiper spindles are larger , can anyone tell me if i have to buy larger spindles or will the originals fit.

Many thanks

I swapped the bulkhead on my 91 not so long ago. I used a Td5 bulkhead, the holes were also differnet - i opted for using the Td5 wiper spindle and motor as the bulkhead was set up for it and i had them.

When I looked at it i think they will work but i was going to use some washers to fill the void.

If I remember correctly the early bulkhead as round holes whereas the Td5 had oval holes?

Ben

Cheers for that Ben , think ile try the washers rout , if all fails ile have to follow ur advice with the TD5 set up
Mant thanks Dave