Wipac LED Fault

Hey all, recently brought full set of WIPAC LED lights (2 side lights, 4 indicators, 2 brake lights) fitted them this evening (and the new fuse thing behind the instrument panel) and all work except the 2 rear indicators tried swapping them with the front and they work on front but not on the back. Weird thing is if I put the old bulbs on the back they work fine again.... any ideas? 2004 90 TD5

why are you saying they do not work?

Have you tried reversing the lights polarity?

Cheers

neilly said:

why are you saying they do not work?

Have you tried reversing the lights polarity?

Cheers

Click to expand...

Heya, they just don’t come on with either hazards or indicators, but the old ones do, and I tried one from the back that didn’t work on the front and it worked.

How do I reverse the lights polarity, I’m not the most mechanically minded person

Swop the two wires around, positive becomes earth, earth become positive.

Have you set up the led indicator relay?

Hicap phill said:

Have you set up the led indicator relay?

Click to expand...

I believe so, is that the little fuse sized block, sits in behind the instrument panel.

Flossie said:

Swop the two wires around, positive becomes earth, earth become positive.

Click to expand...

Thank you I’ll give it a test with some fuse wire tomorrow

Fuse wire?
All you need do is swap the connections over to the leds at the rear