Wing mirror arms ...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

miktdish

Guns n Chainsaws
Full Member
I tried to fold in my 300tdi wing mirrors yesterday (first time in ages).
All I have managed to do is make them floppy.
I tried a good soaking today with penetrating fluid and they now move, but they are as floopy as when the 'click' into place.

Can I open the body up and repair/re-grease or is it buy new ones time ?
 
I tried to fold in my 300tdi wing mirrors yesterday (first time in ages).
All I have managed to do is make them floppy.
I tried a good soaking today with penetrating fluid and they now move, but they are as floopy as when the 'click' into place.

Can I open the body up and repair/re-grease or is it buy new ones time ?
Take top off(little black flap) and should be able to split apart. Spring loaded,never stripped 1 down
 
chances are they fubarred, that little nut will be crusty as fooook, have a look at the unbreakable ones i fitted a while ago very happy with them .
made by uni tuck but you can get cheaper fro LR centre

 
I was being to gentle with the lower cap.
Knocked it off and then used a drift to get thje top cap out....

I guess mine are aftermarket/rubbish as there isn't any adjustment.
I've odrered a pair of "originals" (said the seller).

Pics and info to follow.
 
I did manage to grease up the old ones and they sort-of worked, but bought some new ones anyway as the old ones are going furry for the 3rd time.

Old:
old-mirror-arm-2.jpg

new-mirror-arms.jpg

new-mirror-arm.jpg

new-mirror-arm-2.jpg


Simple enough to replace, just need to get the door card back on.
The other side needs a clean up on the door, which I will get around to at some point or another...
 
Back
Top