Freelander 1 Window regulator cable snapped.

Hi all. Trying to help a friend out who has a 2003 3dr and very very skint! Don’t ask! A while back her drivers window broke. While she was down I pulled the door card off and found a broken cable which is why it’s clearly stopped working. Told her to get a used unit and next time she was down I’d fit it. Anyway I was clearing out the shed and found a N/S kit. I didn’t buy it. Can only assume the old man did and it’s got muddled up some years ago. So question is can I pinch the cables out of this kit to fit her O/S window? Looked up the part number S1806 so it’s spurious one. Any help much appreciated to save her a bit of cash as I don’t need it.

Doubt the cables will e long enough

I thought that but looking at landrover parts list and microcat there doesn’t seem to be any difference that I can find between 3 and 5 door front mechanisms. Hence my question.

Try it and you will find out if it fits or not

After constantly replacing cables using those kits...I just bought the whole regulater minus the motor for £25 from ebay, Now its as smooth as ever and hopefully will last more than a year.

The cables from the left don't fit on the right as they are handed. .
The correct cables cost a few £, nothing more.

I told her to buy a whole reg but as said she's skint and as I came across it randomly if it was of use I thought I'd try and be helpful. I'm never likely to need this kit but I'm not paying to fix her Freelander either.