What's yer Plan's for Working on your Defender this weekend

cornish rattler · Jun 5, 2014

Hi guys

Last weekend I serviced my 90 and need to sort a few jobs out on the 90 ready for billing in july so this week i have ordered a new alternator, and a new fuel sender inc lock ring and seal and son has just ordered 5 new locking wheel nuts, and a straight through middle exhaust pipe as the rest of the exhaust is fairly new and providing everything son has ordered arrive this week ( all my stuff have ) we will be fitting it all this weekend.

so whats everyone else's plan's this weekend for working on their landy

Hippo · Jun 5, 2014

Paint some stone chips.
Wash it.
Hoover it.
Check rear brakes.
Refit some plastic trim.

lee3022 · Jun 5, 2014

Take it for a drive, do some sharp left/right turns to empty water out of it, had some heavy rain this week

ONE LIFE LIVE IT. D90 · Jun 5, 2014

Rear caliper rebuild, discs and pads and new pipes!

Cant wait to out brake people haha :S

cornish rattler · Jun 5, 2014

lee3022 said:
Take it for a drive, do some sharp left/right turns to empty water out of it, had some heavy rain this week

Haha can you not try and roll it over that will get all the water out

harry2012 · Jun 5, 2014

Fit new drop arm & BJ, replace steering damper, fit adjustable panhard rod and replace the rear shocks

waldershelf · Jun 5, 2014

New swivels, rebuild the front callipers, refit it all with new bearings, seals and some nice Goodrich braided hoses.

Paul D · Jun 5, 2014

We're watching the Dukeries rally on Saturday and then laning so Sunday will be a general tidy up of a few bits, re-grease wheel bearings, track rods, props and stuff, and if it's nice enough I might make a side exit eggsauce. At present it clanks a bit as it's bent slightly and touches the chassis on start-up and shut down.

-Defender110- · Jun 5, 2014

Taking the remaining body parts off the chassis and hopefully start cleaning up the chassis and welding up some small holes ive spotted!

mudmut · Jun 5, 2014

check out why the winch dont work and give it a clean

timtheenchanteruk · Jun 5, 2014

hopefully nothing, cos im driving it from leeds to hastings and back....

tools & spares packed.. :/

JohnM70 · Jun 5, 2014

Make a list of stuff that needs to be done, then price up the parts....

Then suffer mild heart attack at cost!

hogie · Jun 5, 2014

Refit all o/s panels following B and C pillar replacement followed by full service (except R380 as I forgot to buy 3 litres of MT94 :5bredface:

mikegsxr · Jun 5, 2014

Fit a new, hopefully non leaky steering pump. Probably drink some beer and burn stuff

cornish rattler · Jun 6, 2014

Nice so a lot of busy peeps this weekend then

Almonds · Jun 6, 2014

Remove side steps (x4) off teh 110, dismantle, grind, grease and paint. Also figure out how I'm gonna connect the wastegate actuator to the plenum.

Alm.

Buxton · Jun 6, 2014

Attempt to fit 2 folding bench seats in the back..........

SteNova · Jun 6, 2014

I'm redoing the small boost pipes to get the wastegate to inlet pressure

aaronmorris · Jun 6, 2014

Nothing to the landrover it's self, But I'll be removing it's new engine from the chassis and attempting to move it to the garage. Going to be fun trying to move the thing

[/URL][/IMG]

lee3022 · Jun 6, 2014

aaronmorris said:
Nothing to the landrover it's self, But I'll be removing it's new engine from the chassis and attempting to move it to the garage. Going to be fun trying to move the thing

[/URL][/IMG]

Good luck with that

What's yer Plan's for Working on your Defender this weekend

Well-Known Member

Lord Hippo

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Old, nackered 'n broke, but the Landy is fine . :)

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Head's a shed

Active Member

Similar threads