Whats gone wrong this time????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MeatCleaverX86

MeatCleaverX86

Active Member
Posts
437
Location
Earth
Hey Hey

Went out off roading at the weekend day and night the landy was perfect.

2 days after driving at night my lo beam doesnt work.

the side light work on ok

and if i flash the high beam works ok

its just lo beam thats the problem. im guessing its a relay gone or possible damp ?? am i on the right tracks here.

Thanks

Rich
 
Earth or Fuse - this is from someone who has had these problems.

First tip - Check fuses if not blown - then remove the fuse and get some sand paper clean connections to make it mint! Then still if not then its an earth.
 
Dip switch burnt out,open up covers behind the steering wheel and have a look.[you can see the contacts as you move the switch] Easy enough to replace.
 
Last edited:
had a poke around yesturday all fuses are good no corrosion wiring looks almost new there.

noting obvious loose under the hood sprayed good old dw40 around as normal do.

will look at the switch later when i get more time do they just burn out instant like this as most switch problem i come across are more intermittent this was instant ?

cheers guys
 
richard_paradox said:
Hey Hey

Went out off roading at the weekend day and night the landy was perfect.

2 days after driving at night my lo beam doesnt work.

the side light work on ok

and if i flash the high beam works ok

its just lo beam thats the problem. im guessing its a relay gone or possible damp ?? am i on the right tracks here.

Thanks

Rich
Click to expand...
Did you find the problem,we like to know the outcome.:D
 
Hello

I have ordered a switch and was delivered this morning.

as long as the rain holds off will be fitting two new witch and giving the beast a service on the weekend. will give you guys an update monday if all goes well
 
Hey hey the rain has stayed away new oils filters etc fitted and both the left had light switches replaced all working :) once removed I could see the bad contact / cracked plastics fitted two Lucas switches feel very nice all done with no swearing or grazed knuckles

Cheers guys
 
You must log in or register to reply here.

Similar threads

G
P38 4.0 v8 Automatic goes into low range all on its own
Replies
10
Views
2K
Offie
O
Zorro587
Noise gone but prop shaft queries abound
Replies
14
Views
2K
Chris_68
C
J
Classic 1982 Range Rover Headlight / Hazard Issue
Replies
8
Views
2K
Datatek
Datatek
P
L322 TD6 lost all drive
Replies
5
Views
982
backinblack
backinblack
N
Disco 2 Whats it worth....?
2
Replies
32
Views
3K
nomechanic
N
Back
Top