what u reckon to my new wheels n tyres??

WHEELS & TYRES GRISLEY CLAWS on eBay (end time 24-Jun-09 17:41:57 BST)

pickin em up at the weekend, what do u all think?

thi luk sound enuf them does duk.

DOH! been looking for some mud tyres cheap - never saw them on there though. looks like a good find mate.

Yeah I am more than happy, what do you reckon they will be like on the road?

that was a good buy!

MikeDISCO said:

Yeah I am more than happy, what do you reckon they will be like on the road?

Click to expand...

Bouncier than standard, less grippy than standard, noisier than standard, so about the same as any other wide mud tyre, as well as being manageable in the dry and feckin' terrible in the wet!

Have fun !!!

there great rubber mate, just had them on mine for about 6mnth. best offroad tyres ive ever had !!!!! very very noisy on the road, sound like a german bomber, but i begin to love the noise, or atleast i did.

Nope, not jealous, no not at all

picked em up and fitted em today, they look awesome! really quite noisy though...

Should i have done anything else other than fit em? stop ends? any advice as newbie and still learning

MikeDISCO said:

picked em up and fitted em today, they look awesome! really quite noisy though...

Should i have done anything else other than fit em? stop ends? any advice as newbie and still learning

Click to expand...

:nopics: :mooning: :hysterically_laughi

cant get outside in this rain storm to take any pics, just thought some of u more experienced might be able to advise from the wheel size and type

MikeDISCO said:

cant get outside in this rain storm to take any pics, just thought some of u more experienced might be able to advise from the wheel size and type

Click to expand...

rainstorm? where are you.

Staffs, it absolutely bucketed it down last nite...

Any advice guys?

No-one can tell for definite if anything needs to be done 'cos the size you have is borderline need/not need anything doing!!

It's also down a lot to how you use the thing! If you're always off-roading and using all the suspension travel, tight turns etc then it's possible you need to camel cut the rears, trim the front bumper endcaps and adjust lockstops, but with Landrovers, including Discos, all adjustments are suck-it-and-see. Turn the front wheels and see if the inside edges (leading and trailing) catch the radius arms or chassis etc whilst you also rotate the wheel. If they do catch anywhere you need to adjust the lockstops. Adjusting a bit too much is OK, better to have 5mm or more clearance, though much more and turning the Torrey canyon might be easier. If they don't catch you might be OK. Drive it a while and see if they're rubbing anywhere and adjust as necessary!

thanks for that paul

had a good look today, quite abit of clearance all round which i am pleased with.

The only time it rubs is when im on full lock.... any advice on adjusting stops? never done it before....

Turn the bolt as in the pic, simply turn it til it stops rubbing.