What torque do the bellhousing studs on a 200tdi need to be done up to?
- Thread starter 08mckerp
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
robint
Well-Known Member
- Posts
- 7,057
didnt fink there was a setting for them just as tight as ya can get them i was told
they have to be tight but don't go swinging on a 2 foot wrench or you'll pull the threads
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
did mine with standard 17mm spanner, proper tight
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
see titlecheers
30 ft/lb I believe.
did my eyes deceive or did you just change that from 20ft/lb ?
is that from the WSM ?
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
No from my warren brown tension wrench hand book, was gonna say in nm but realised you talk imperial.
don't suppose you've got it in .pdf format ?
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
That's right.
if i ask nicely will you email me a copy of it ?
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
and me please
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
Sean, when you said: don't suppose you've got it in .pdf format ?
I said, that's right, meaning I dont have in .pdf.
Only the hard copy that came with wrench, " Application Data & Technical Information." it list possibly all passenger vehicles common to australia, commencing at Alfa Romeo and finishing at Wolseley, it references the specific torque values for: Cylinder head, big ends, mains, fly wheel, clutch etc. for all of them, it does not give values for the bellhousing nor a lot of other unessential fittings, but it does give a ready reckoner for bolts of varying thread types and sizes; metric, bsw, nc, unc, bsf, unf. it is from this table that I referenced the 10mm bell housing bolt torque from, that's why I said, " I believe" not, it is. I thought that all tension wrenches came with a guide like this.
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
mine didn't. so if we need to know any values in future we just ask you
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
Noooooo! Fella never be doing anythin else would he, shoulda shut me gob:doh::doh::doh:
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
What you doing awake? u was up all night talking about rag-heads.
sleep is fer whimps
ssmn1234
Active Member
- Posts
- 691
- Location
- Cairns, Australia.
I'm gonna leave that one alone
