What Timing Belt kit?

Where's the best place to get a timing belt kit?

There's so many different combinations so which one shall I buy?

How much do you want to pay?
Are you changing the belt, tensioner and drive gear? which seals are you going to change?
Only major suggestion is go for Dayco belt, I chose a G ( OEM ) spec kit from LR Direct.
Cheers

Whats the "G" spec kit?
The last time I bought a kit it snapped minutes after instalation cost £55. The garage bought on from Land Rover and it's been fine.
So I'm wary of buying a cheap one for my other Disco.
Was yours a good kit from LR direct?

At the end of the part number of an individual part is the suffix "G" this should denote that it is OEM spec, i.e. original fitment or equivalent. If it does not have this then it "may" not be as good quality. ( this is a bit of a minefield).
As i said have a look on LRDirect if you have the kit part number ( STC4096L ??) or give them a call, the people there seem very knowledgable.
I cannot remember the exact kit I used from LR Direct unfortunately. But individual part numbers were OEM equivalent.

Also, depending on how old the engine is, has it had the newer drive pulley fitted with the flange? Old kit had the flange on the tensioner pulley.

Cheers

Thank you for your advice, will get in touch with LRDirect.

Always use a Dayco Belt, continental are good too. SKF, FAG or INA bearings. SKF were OE.

I buy mission critical engine bits from Turners: http://turnerengineering.co.uk/acatalog/300Tdi.html