Monkeymick
New Member
- Posts
- 68
- Location
- North East England
Sigh....
I've everything I now need to replace the rather rusty capping on the Landy with a set from a series 3 I picked up on ebay for a fiver.
The plan is to cold galvanise then fit them, but I have no idea what size rivets I'd need to use!
Any ideas?
Thanks in advance!
MM
I've everything I now need to replace the rather rusty capping on the Landy with a set from a series 3 I picked up on ebay for a fiver.
The plan is to cold galvanise then fit them, but I have no idea what size rivets I'd need to use!
Any ideas?
Thanks in advance!
MM
